We study the band structure of elastic waves propagating in a nano-piezoelectric phononic crystal consisting of a polymeric matrix reinforced by BaTiO3 inclusions in square, rectangular, triangular, honeycomb and Kagomé lattices. We also investigate the influence of inclusion cross section geometry - circular, hollow circular, square and rotated square with a 45º angle of rotation with respect to x and y axes. Plane wave expansion method is used to solve the governing equations of motion of a piezoelectric solid based on classical elasticity theory, ignoring nanoscopic size effects, considering two-dimensional periodicity and wave propagation in the xy plane. Complete band gaps between XY and Z modes are observed for all inclusions and the best performance is for circular inclusion in a triangular lattice. Piezoelectricity influences significantly the band gaps for hollow circular inclusion in lower frequencies. We suggest that nano-piezoelectric phononic crystals are feasible for elastic vibration management in GHz.
1 January 2022 in Journal of Mathematical Analysis and Applications
We investigate theoretically and experimentally the forced response of flexural waves propagating in a 1D phononic crystal (PC) Euler-Bernoulli beam, composed by steel and polyethylene, and its band structure. The finite element, spectral element, wave finite element, wave spectral element, conventional and improved plane wave expansion methods are applied. We demonstrate that the vibration attenuation of the unit cell can be improved choosing correctly the polyethylene and steel quantities and we suggest the best percentages of these materials, considering different unit cell lengths. An experiment with a 1D PC beam is proposed and the numerical results can localize the band gap position and width close to the experimental results. A small Bragg-type band gap with low attenuation is observed between 405 Hz - 720 Hz. The 1D PC beam with unit cells of steel and polyethylene presents potential application for vibration control.
We investigated the band structure of flexural waves propagating in a metaconcrete thin plate, consisting of a concrete matrix reinforced by steel inclusions coated by rubber in square and triangular lattices. We considered the classical Kirchhoff-Love thin plate theory. We also studied the influence of inclusion geometry - circular, square and rotated square with a 45° angle of rotation with respect to the x, y axes. Improved plane wave expansion method was used to solve the wave equation considering flexural wave propagation in the xy plane. Flat bands and locally resonant band gaps were observed for all types of inclusion studied regarding square and triangular lattices. The locally resonant band gaps for square and rotated square inclusions in a triangular lattice were slightly shifted to higher frequencies than that given by circular inclusion. We suggest that the metaconcrete thin plate studied should be feasible for flexural vibration control in low frequencies.