The increasing oceanic absorption of atmospheric CO2 decreases the ocean's carbonate and pH levels, harming marine life. This review covers carbonate electrochemical sensors based on ionophores for the advancement of ocean acidification research.
Hydrogen peroxide (H2O2) has been reported to be used for the illegal treatment of fishery products in order to obtain “fake” freshness. Residues of H2O2 in food may be of toxicology concern. In this study, a nonenzymatic sensor was developed based on Fe@PCN-224 metal–organic frameworks wrapped by Nafion to detect H2O2 concentration. The hybrid structure of Fe@PCN-224 was fabricated by incorporated free FeIII ions into the center of PCN-224, which was ultra-stable due to the strong interactions between Zr6 and the carboxyl group. Scanning electron spectroscopy images exhibited that Nafion sheets crossed together on the surface of Fe@PCN-224 nanoparticles to form a hierarchical and coherent structure for efficient electron transfer. Electrochemical investigations showed that the Fe@PCN-224/Nafion/GCE possessed good linearity from 2 to 13,000 μM (including four orders of magnitude), low detection limits (0.7 μM), high stability in continuous monitoring (current remained nearly stable over 2300 s) and in long-term measurement (current decreased 3.4% for 30 days). The prepared nanohybrid modified electrode was effectively applied to H2O2 detection in three different fishery products. The results were comparable to those measured using photometrical methods. The developed electrochemical method has a great potential in detecting the illegal management of fishery products with H2O2.
16 August 2024 in Limnology and Oceanography: Methods
Iridium oxide electrodes made by melted Li 2 CO 3 + Na 2 O 2 in a semi-closed/closed reactor exhibited fast response and high stability. A slight periodic fluctuation of potential change with standard deviation < 0.65 mV in 48 h and < 2.30 mV (0.04 pH) over 139 h were observed. The composition, structure, and sensing mechanism of the pH sensitive substance was examined. The XRD pattern and XPS results suggested the newly produced material H y-x Li x [LiIr 2 ]O 6 was a mixture of H 5-x Li x [LiIr 2 ]O 6 and H 3-x Li x [LiIr 2 ]O 6 with a HCrO 2 structure. Approximately 95% of Li + was replaced by H + after acid treatment. The pH sensing process was found to be an irreversible redox reaction between the tetravalent and trivalent iridium oxides according to the CV and XPS results. The presence of lithium ion in the lattice combined with well-crystallized small crystals corresponded to the fast response during the pH sensing process. The crystal structure may help to protect iridium from the interference of weak oxides, and thus may maintain stability with a relatively acceptable potential drift in the natural redox condition. The large portion of OH − existing in the oxide lattice detected by XPS confirmed the well-hydrated structure, which may also help the electrode to maintain high stability.