In order to make accurate judgements of rolling bearing main fault types using the small sample size fault data set, a novel approach is put forward that combines particle swarm optimisation kernel fuzzy C‐means (PSO‐KFCM) and variational mode decomposition (VMD). Firstly, by calculating the centre frequency and Pearson correlation coefficient of each mode function of VMD, the decomposition level K of VMD is determined, and the optimal decomposition result is obtained. The singular value decomposition method was used to extract a characteristic value corresponding to the main fault types of bearings from the optimal decomposition results, and faulty feature sample space was established. Then, the kernel function parameters and the initial clustering centre were used as optimisation variables. The PSO algorithm was used to solve the clustering model. The clustering centre of each fault type under the optimal classification result was obtained, and the fault diagnosis model was established. Finally, different fault classification methods are compared, and the conclusions drawn from the experiment show that the method can achieve good results in bearing fault diagnosis. The accuracy of fault classification was improved obviously.
The primary aim of this study was to develop and validate an accurate sub-domain analytical model to estimate the magnetic field of electric machines with high-temperature superconducting (HTS) excitation and armature windings. The model was developed by utilizing the separation variable and harmonic analysis methods to solve Laplace's or Poisson's equations of the vector magnetic potential in two-dimensional polar coordinates. The theoretical derivations of the final analytical equations for the magnetic flux density distribution in the air-gap and in permanent magnets, electromagnetic torque, and no-load back-electromotive force (back-EMF) are explained in detail. Finally, the magnetic vector potential, flux density distribution of each sub-domain, no-load back-EMF, and inductive reactance of the armature winding were solved by considering the critical parameters of the superconducting materials, and the influence of higher harmonics. The finite-element method (FEM) was used to validate the accuracy of the developed analytical method for the investigated HTS generator. The results show the developed analytical method is accurate and time-saving.