Viorel POP

Prof. Viorel POP


Research Focus & Metrics

Academic Career Length

31Years (1996-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
3 July 2020 in Nanomaterials
Verified
Journal Article
Open access
PDF file
Arnab ChakrabortyArnab Chakraborty
Arnab Chakraborty
RHRazvan Hirian
Razvan Hirian
GKGregor Kapun
Gregor Kapun
VPViorel POP
Viorel POP
Nanostructured alloy powders of SmCo5 + 10 wt% Fe obtained using recycled material were studied for the first time. The SmCo5 precursor was obtained from commercial magnets recycled by hydrogen decrepitation. The results were compared with identically processed samples obtained using virgin SmCo5 raw material. The samples were synthesized by dry high-energy ball-milling and subsequent heat treatment. Robust soft/hard exchange coupling was observed—with large coercivity, which is essential for commercial permanent magnets. The obtained energy products for the recycled material fall between 80% and 95% of those obtained when using virgin SmCo5, depending on milling and annealing times. These results further offer viability of recycling and sustainability in production. These powders and processes are therefore candidates for the next generation of specialized and nanostructured exchange-coupled bulk industrial magnets.

26 June 2015 in Journal of Alloys and Compounds
Verified
Journal Article
Closed access
SGSimona Gutoiu
Simona Gutoiu
OIOlivier Isnard
Olivier Isnard
ICIonel Chicinas
Ionel Chicinas
FPFlorin Popa
Florin Popa
ATAlbert Takacs
Albert Takacs
VPViorel POP
Viorel POP

20 April 2023 in Magnetochemistry
Verified
Journal Article
Open access
PDF file
Diana BeneaDiana Benea
Diana Benea
VPViorel POP
Viorel POP
The intrinsic magnetic properties (magnetic moments, magneto-crystalline anisotropy, Curie temperatures) of the (Fe1−xMx)2B alloys have been calculated using the spin-polarized relativistic Korringa–Kohn–Rostoker (SPR-KKR) band structure method. The transition metal elements M (M = Co, Ni, Mo, Ta, W and Re) considered in the present study are reported to form stable M2B or FeMB alloys with a tetragonal Cu2Al structure type. The experimental studies show that the Fe2B alloy has a large magnetization (173 Am2/kg), a large Curie temperature (1017 K) and a relatively large anisotropy constant K1 (−0.80 MJ/m3), but the alloy is inappropriate for permanent magnet applications due to in-plane easy magnetization axis (EMD). The present investigations show the magnetocrystalline anisotropy behaviour by doping with selected d-elements aiming to find an appropriate dopant which is able to switch the EMD from planar to axial and to enhance the magnetocrystalline anisotropy energy (MAE) value without a major decrease of magnetization and Curie temperature.

15 April 2014 in IEEE Transactions on Magnetics
Verified
Journal Article
Closed access
ICIonel Chicinas
Ionel Chicinas
TMTraian Florin Marinca
Traian Florin Marinca
BNBogdan Neamtu
Bogdan Neamtu
FPFlorin Popa
Florin Popa
OIOlivier Isnard
Olivier Isnard
VPViorel POP
Viorel POP
The nanocrystalline/nanosized mixed manganese-nickel spinel ferrite Mn 0.5 Ni 0.5 Fe 2 O 4 was successfully synthesized by the classical ceramic method followed by mechanical milling. The refinement of the crystallite size is obtained by increasing the milling time up to 120 min. The particles size distribution performed on the milled powder showed a fine ferrite powder. The Néel temperature of Mn 0.5 Ni 0.5 Fe 2 O 4 decreases by increasing the milling time as a result of the structural disorder and it is larger when compared with the manganese ferrite one and lower when compared with the nickel ferrite one. The saturation magnetization of the spinel structure was found to be 2.42 μB and it is close to the theoretical one 2.5 μB. The saturation magnetization and spontaneous magnetization decrease by increasing milling time. The spontaneous magnetization is reduced more drastically when compared with the saturation magnetization. One of the major causes is assumed to be the spin canted effect induced at the particles surface by milling process.

19 January 2010 in IEEE Transactions on Magnetics
Verified
Journal Article
Closed access
BNBogdan Neamtu
Bogdan Neamtu
OIOlivier Isnard
Olivier Isnard
ICIonel Chicinas
Ionel Chicinas
VPViorel POP
Viorel POP
Nanocrystalline Supermalloy powders were obtained by wet milling in argon atmosphere. As process control agent the C6H6 was used. Several milling times have been used ranging from 2 up to 20 h. The formation of the alloy was evidenced by X-ray diffraction (XRD). An annealing at 623 K for 4 h was applied in order to remove the internal stresses and to finish the solid state reaction. A typical crystallite size of 11-12 nm has been obtained after 20 h of wet milling. The magnetic measurements have been performed in a magnetic field up to 8 T at 300 K. A decrease of magnetization is observed upon increasing the milling time due both to the defects induced during the milling and to adsorbed benzene on the particles surface. Differential scanning calorimetry (DSC) curves show the exothermic peaks correlated with the presence of the C6H6 on the powder particles. The benzene and the internal stresses and crystalline defects are eliminated and an increase of magnetization with milling time can be observed for samples annealed at 623 K for 4 h.

14 December 2018 in Journal of Applied Physics
Verified
Journal Article
Closed access
PDF file
NMNicolas Maât
Nicolas Maât
RLRodrigue Lardé
Rodrigue Lardé
VNVirginie Nachbaur
Virginie Nachbaur
JBJean-Marie Le Breton
Jean-Marie Le Breton
OIOlivier Isnard
Olivier Isnard
ICIonel Chicinaş
Ionel Chicinaş
The main goal of this paper is to investigate the behavior of mechanically milled Nd2Fe14B powders. The effect of the milling on the magnetic properties of the Nd2Fe14B intermetallic is measured and is compared to the structural analysis performed by Mössbauer spectroscopy and atom probe tomography (APT). The high energy ball milling of Nd2Fe14B powders for up to 12 h induces the progressive disappearance of the hard magnetic behavior. Mössbauer spectroscopy and APT analyses have shown the decomposition of the Nd2Fe14B phase in the early stages of milling into an amorphous, disordered Nd-Fe-B phase that is rich in neodymium and in an α-Fe phase. The corresponding microstructure is very characteristic, with the formation of submicrometric pure iron particles, surrounded by an amorphous shell enriched in neodymium and in boron. By using APT, each step of the process can be identified. This high-resolution technique allows us obtaining a 3D mapping in real space of the chemical species (Nd, Fe, and B) on the atomic scale. Three-dimensional reconstructions of the nanostructure of the analyzed samples are realized from the data and show the formation of the Nd2Fe14B nanocomposite that is composed of α-Fe soft magnetic nanosized crystallites embedded in the Nd2Fe14B hard magnetic matrix. These results confirm the decomposition of the initial Nd2Fe14B phase. After 2 h of high-energy mechanical milling, Fe particles with diameters of up to 100 nm are observed. By increasing the milling time, the element intermixing and grain size reduction of the decomposition products can be observed.