Denis Anikiev

Dr. Denis Anikiev

orcid

Research Focus & Metrics

Academic Career Length

9Years (2018-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
15 May 2014 in Geophysical Journal International
Verified
Journal Article
Open access
PDF file
DADenis Anikiev
Denis Anikiev
JVJ. Valenta
J. Valenta
FSF. Staněk
F. Staněk
LEL. Eisner
L. Eisner
Seismic monitoring can greatly benefit from imaging events with a low signal-to-noise ratio (SNR) as the number of the events with a low signal grows exponentially. One way to detect weaker events is improvement of a SNR by migration-type stacking of waveforms from multiple stations. We have developed a new method of location of seismic events that involves stacking of seismic phases and amplitudes along diffraction traveltime curves to suppress noise and detect seismic events with a SNR lower than that on individual receivers. The stacking includes polarity correction based on a simultaneous seismic moment tensor inversion and detection algorithm on the stack function. We applied this method to locate microseismicity induced by hydraulic fracturing. First we calibrated the velocity model by locating perforation shots at known locations. Then we processed 3 d of data from microseismic monitoring of shale stimulation and benchmarked migration-type locations of the largest events that were manually located. The detected and located events induced by hydraulic fracturing in this case study are mostly shear events forming narrow bands along the maximum horizontal stress direction approximately 100 m above the injection intervals. The proposed technique is fully automated and feasible for real-time seismic monitoring.

11 August 2021 in Solid Earth
Verified
Journal Article
Open access
PDF file
SASteffen Ahlers
Steffen Ahlers
AHAndreas Henk
Andreas Henk
THTobias Hergert
Tobias Hergert
KRKarsten Reiter
Karsten Reiter
BMBirgit Müller
Birgit Müller
DADenis Anikiev
Denis Anikiev
The contemporary stress state in the upper crust is of great interest for geotechnical applications and basic research alike. However, our knowledge of the crustal stress field from the data perspective is limited. For Germany basically two datasets are available: orientations of the maximum horizontal stress (SHmax) and the stress regime as part of the World Stress Map (WSM) database as well as a complementary compilation of stress magnitude data of Germany and adjacent regions. However, these datasets only provide pointwise, incomplete and heterogeneous information of the 3D stress tensor. Here, we present a geomechanical–numerical model that provides a continuous description of the contemporary 3D crustal stress state on a regional scale for Germany. The model covers an area of about 1000×1250 km2 and extends to a depth of 100 km containing seven units, with specific material properties (density and elastic rock properties) and laterally varying thicknesses: a sedimentary unit, four different units of the upper crust, the lower crust and the lithospheric mantle. The model is calibrated by the two datasets to achieve a best-fit regarding the SHmax orientations and the minimum horizontal stress magnitudes (Shmin). The modeled orientations of SHmax are almost entirely within the uncertainties of the WSM data used and the Shmin magnitudes fit to various datasets well. Only the SHmax magnitudes show locally significant deviations, primarily indicating values that are too low in the lower part of the model. The model is open for further refinements regarding model geometry, e.g., additional layers with laterally varying material properties, and incorporation of future stress measurements. In addition, it can provide the initial stress state for local geomechanical models with a higher resolution.

2 April 2015 in Geophysical Journal International
Verified
Journal Article
Closed access
PDF file
FSFrantišek Staněk
František Staněk
DADenis Anikiev
Denis Anikiev
JVJan Valenta
Jan Valenta
LELeo Eisner
Leo Eisner
Microseismic monitoring from large arrays using migration-based detection and location techniques is limited by detections of false positive events, which are the interpretation of spurious/noisy signals as real events. Therefore, semblance has been considered to differentiate between false positive and true events. However, semblance by itself is not suitable for variable signals such as those caused by shear source radiation. We present a new methodology for event detection and location using semblance of amplitudes corrected by a source mechanism. Our method is suitable for multichannel processing of microseismic data sets acquired with large arrays. The amplitudes are corrected by the radiation pattern of the inverted source mechanism before the semblance computation. We show that the source mechanism correction is the key factor in maximizing the value of semblance and makes the detection based on semblance superior to simple stacking. We apply this method to a data set recorded by a large surface star-like array on synthetic as well as on field data.

1 January 2007
Verified
Conference Paper
Closed access
DGD. Gajewski
D. Gajewski
DADenis Anikiev
Denis Anikiev
BKB. Kashtan
B. Kashtan
ETE. Tessmer
E. Tessmer
CVC. Vanelle
C. Vanelle
The localization of seismic events is of great importance for hydro frac and reservoir monitoring. For deposits with weak 4‐D signatures the passive seismic method may provide an alternative option for reservoir characterization. We introduce a new localization technique which does not require any picking of events in the individual seismograms of the recording network. The localization is performed by a modified diffraction stack of the squared amplitudes of the input seismograms resulting in the image section. The method is target oriented and is best suited for large networks of surface and/or downhole receivers. The source location is obtained from the maximum of the image section for the time window under consideration. Since the focusing analysis is performed only in this section, no optimized search procedures are required. The source time is determined in a second processing step after the source location. Initial tests with 2‐D homogeneous media indicate the high potential of the method. Since the maximum of the image section is distinct even very weak events can be detected.

29 January 2021 in Solid Earth
Verified
Journal Article
Open access
PDF file
ÁGÁngela María Gómez-García
Ángela María Gómez-García
EBEline Le Breton
Eline Le Breton
MSMagdalena Scheck-Wenderoth
Magdalena Scheck-Wenderoth
GMGaspar Monsalve Monsalve
Gaspar Monsalve Monsalve
DADenis Anikiev
Denis Anikiev
Remnants of the Caribbean Large Igneous Plateau (C-LIP) are found as thicker than normal oceanic crust in the Caribbean Sea that formed during rapid pulses of magmatic activity at ∼91–88 and ∼76 Ma. Strong geochemical evidence supports the hypothesis that the C-LIP formed due to melting of the plume head of the Galápagos hotspot, which interacted with the Farallon (Proto-Caribbean) plate in the eastern Pacific. Considering plate tectonics theory, it is expected that the lithospheric portion of the plume-related material migrated within the Proto-Caribbean plate in a north–north-eastward direction, developing the present-day Caribbean plate. In this research, we used 3D lithospheric-scale, data-integrative models of the current Caribbean plate setting to reveal, for the first time, the presence of positive density anomalies in the uppermost lithospheric mantle. These models are based on the integration of up-to-date geophysical datasets from the Earth's surface down to 200 km depth, which are validated using high-resolution free-air gravity measurements. Based on the gravity residuals (modelled minus observed gravity), we derive density heterogeneities both in the crystalline crust and the uppermost oceanic mantle (<50 km). Our results reveal the presence of two positive mantle density anomalies beneath the Colombian and the Venezuelan basins, interpreted as the preserved fossil plume conduits associated with the C-LIP formation. Such mantle bodies have never been identified before, but a positive density trend is also indicated by S-wave tomography, at least down to 75 km depth. The interpreted plume conduits spatially correlate with the thinner crustal regions present in both basins; therefore, we propose a modification to the commonly accepted tectonic model of the Caribbean, suggesting that the thinner domains correspond to the centres of uplift due to the inflow of the hot, buoyant plume head. Finally, using six different kinematic models, we test the hypothesis that the C-LIP originated above the Galápagos hotspot; however, misfits of up to ∼3000 km are found between the present-day hotspot location and the mantle anomalies, reconstructed back to 90 Ma. Therefore, we shed light on possible sources of error responsible for this offset and discuss two possible interpretations: (1) the Galápagos hotspot migrated (∼1200–3000 km) westward while the Caribbean plate moved to the north, or (2) the C-LIP was formed by a different plume, which – if considered fixed – would be nowadays located below the South American continent.

25 October 2022 in Frontiers in Earth Science
Verified
Journal Article
Open access
DADenis Anikiev
Denis Anikiev
UWUmair bin Waheed
Umair bin Waheed
FSFrantišek Staněk
František Staněk
DADmitry Alexandrov
Dmitry Alexandrov
QHQi Hao
Qi Hao
LELeo Eisner
Leo Eisner
Location of earthquakes is a primary task in seismology and microseismic monitoring, essential for almost any further analysis. Earthquake hypocenters can be determined by the inversion of arrival times of seismic waves observed at seismic stations, which is a non-linear inverse problem. Growing amounts of seismic data and real-time processing requirements imply the use of robust machine learning applications for characterization of seismicity. Convolutional neural networks have been proposed for hypocenter determination assuming training on previously processed seismic event catalogs. We propose an alternative machine learning approach, which does not require any pre-existing observations, except a velocity model. This is particularly important for microseismic monitoring when labeled seismic events are not available due to lack of seismicity before monitoring commenced (e.g., induced seismicity). The proposed algorithm is based on a feed-forward neural network trained on synthetic arrival times. Once trained, the neural network can be deployed for fast location of seismic events using observed P-wave (or S-wave) arrival times. We benchmark the neural network method against the conventional location technique and show that the new approach provides the same or better location accuracy. We study the sensitivity of the proposed method to the training dataset, noise in the arrival times of the detected events, and the size of the monitoring network. Finally, we apply the method to real microseismic monitoring data and show that it is able to deal with missing arrival times in efficient way with the help of fine tuning and early stopping. This is achieved by re-training the neural network for each individual set of picked arrivals. To reduce the training time we used previously determined weights and fine tune them. This allows us to obtain hypocenter locations in near real-time.