We experimentally investigated the forces induced by monochromatic and solitary waves on a submerged horizontal plate in a wave flume. The experimental results of two-dimensional wave forces on the plate over a 1:10 simple slope and a flat bottom are presented. The effects of the uneven bottom on wave loads are discussed by comparing the results with those in a constant water depth. The measured nonlinear wave forces exhibited considerable discrepancies with the theoretical results from the linear wave theory. The wave forces on the plate induced by monochromatic waves over the simple slope in intermediate water showed no appreciable difference with the flat-bottom results. The solitary wave forces in terms of the downward vertical force and overturning moment significantly decreased in the existence of the simple slope. Furthermore, the dependency of the wave length, wave height and the submergence depth on the wave loads is also discussed.
The micropressure wave radiated from a tunnel exit is one of the environmental problems which can be investigated from the temporal pressure gradient of the compression wave. The effects of inclined portals on the initial compression wave, specifically the maximum temporal pressure gradient, are numerically studied by solving the flow field during a high-speed train nose entering a tunnel, using the unsteady three-dimensional (3D) Euler equations. After mesh independency and temporal sensitivity tests of the numerical method, validations are conducted by comparing the numerical results with experimental and numerical data. The temporal gradients of pressure wavefront are parametrically investigated for different combinations among the train speed, the blockage ratio of the train to tunnel, and inclination angle of the tunnel entrance. The numerical results show a negligible influence of train Mach number or blockage ratio on the normalized pressure gradient and noticeable effects of inclination angle, location of the train with respect to the median line of a double-tracked tunnel (DT), and the profile of train nose. Based on the numerical results, an empirical formula is proposed to predict the relationship between the maximum pressure gradient and the inclination angle of tunnel entrance.
Scour prediction is essential for the design of offshore foundations. Several methods have been proposed to predict the equilibrium scour depth for monopiles. By introducing an effective diameter, such methods could also be applied to predicting scour depth for pile groups. Yet, there are still difficulties in estimating the equilibrium scour depth of foundations in complex shapes, such as the tripod foundation. This study investigates the clear-water scour around the tripod and hexapod foundations through laboratory experiments, with uniform bed sediment and steady current. Here, the authors propose an approach to calculate the effective diameter for the tripod and hexapod models, which is similarly as for the pile groups. Three widely-used methods in predicting equilibrium scour depth have been evaluated, and the best method is recommended.
The influence of unvented hood on the initial compression wave generated by a high-speed train entering a tunnel is investigated using computational fluid dynamics. Comparisons with experimental data are first carried out to verify the numerical model. The relationship between the pressure gradient peaks and main aspect factors is studied by parametric analysis. Influences of train speed, blockage ratio of train to tunnel, section area ratio of hood to tunnel, and hood length are investigated. Based on the numerical results, two empirical formulations are proposed to predict the influence of hood and tunnel geometries on the maximum pressure gradient during the CRH3 entering a tunnel with unvented hood.