The emissions of Taylor cones from a wide range of ionic liquids (ILs) have been tested in vacuo in an attempt to identify what physical properties favor the purely ionic regime (PIR). This regime is well known in the case of Taylor cones of liquid metals. For nonmetallic liquids, it has been previously observed in conventional (capillary tube) electrospray sources at room temperature only for the room temperature molten salt (ionic liquid) ( -ethyl-3-methylimidazolium). A large number of other ILs and their mixtures have been studied here, most of which (but not all) are unable to reach the PIR at room temperature. Based on these results and additional theoretical considerations, strong support is assembled for the notion that the PIR is favored by ILs not only of high electrical conductivity but also of high surface tension. This hypothesis is confirmed by tests with three recently synthesized ILs, , , and , all of which combine exceptional surface tension and electrical conductivity, and all of which reach the PIR at room temperature far more readily than .
Encapsulation-based materials are produced introducing some small healing fluid-filled capsules in a matrix. These materials can self-heal when internal cracks intercept and break the capsules. If the healing agent is released, the crack can be sealed. However, this is not always the case. These capsules need to be designed with the adequate shape and material to be properly broken. This paper presents two application models based on the combination of eXtended Finite Element Method (XFEM) elements and Cohesive Surfaces technique (CS) to predict crack propagation. Two types of encapsulated systems are considered: a concrete beam in a three-point bending test, and a micro-scale model of a representative volume element of a polymer subjected to a uniaxial tensile test. Despite both systems rely on different capsule shapes and different constituent materials, the models predict a similar non-linear response of the overall material strength governed by the coupled effect of the interface strength and the capsule radii-to-thickness ratio. Furthermore, even if an inadequate material and geometry combination is used, it is found that the mere presence of capsules might achieve, under certain conditions, an interesting overall reinforcement effect. This effect is discussed in terms of clustering and volume fraction of capsules
1 November 2016 in Composites Science and Technology