There are a lot of studies that show the legitimacy of subsidizing renewable energy; however, some mechanisms are defective, and there are problems with the appropriate allocation of funds. Therefore, this paper aims to look at the situation of allocating funds to photovoltaics (PV) micro-installations in Poland through the “My Electricity” program. The article presents the results of analyses aimed at identifying inequalities between provinces in the use of funds available under the “My Electricity” program and verifying whether these inequalities are getting worse and whether the intensity of support should not be territorially conditioned in terms of maximization an electricity production. As part of two editions of the “My Electricity” program (until 1 August 2020), over 64,000 PV micro-installations were created with an average power of approximately 5.7 kWp. The total installed PV capacity was 367.1 MWp (1st edition: 159.3 MWp, 2nd edition: 207.8 MWp). Financial resources (as a whole), in the second edition of “My Electricity” program, were distributed better than in the first edition. In the first edition, as much as 7.60% of funds were allocated inefficiently; in the second edition, it was only 3.88%. Allocation surpluses occur in provinces where the average disposable income is low and where there are a small number of households. There is a potential to introduce a territorial project selection criteria. The analysis shows that the criteria should promote provinces with higher disposable income and a larger number of households.

The paper considers technical and economic possibilities to provide geothermal heat to individual recipients using a mobile thermal storage system (M-TES) in Polish conditions. The heat availability, temperature and heat cost influence the choice of location—Bańska Niżna, near Zakopane in the southern part of the Poland. The indirect contact energy storage container was selected with phase change material characterized by a melting temperature of 70 °C and a heat storage capacity of 250 kJ/kg, in the amount of 800 kg. The economic profitability of the M-TES system (with a price per warehouse of 6000 EUR, i.e., a total of 12,000 EUR—two containers are needed) can be achieved for a heat demand of 5000 kWh/year with the price of a replaced heat source at the level of 0.21 EUR/kWh and a distance between the charging station and building (heat recipient) of 0.5 km. For the heat demand of 15,000 kWh/year, the price for the replaced heat reached EUR 0.11/kWh, and the same distance. In turn, for a demand of 25,000 kWh/year, the price of the replaced heat source reached 0.085 EUR/kWh. The distance significantly affected the economic profitability of the M-TES system—for the analyzed case, a distance around 3–4 km from the heat source should be considered.

Micro-cogeneration (mCHP) is a promising solution for the generation of heat and electricity in households, it contributes to reducing carbon dioxide emissions in countries where the production of electricity is mainly based on fossil fuels. Its dissemination in Poland faces barriers in the form of high purchase prices in relation to electricity productivity. In this work 1% of the household population in Poland was analyzed using the Monte Carlo method. It was found that for mCHP to become economically profitable for a group of at least 10,000 households, its price should fall from around 18,000 euros (711.5 euros/kW_th and 18,000 euros/kW_e) to 4800 euros (189.7 euros/kW_th and 4800 euros/kW_e) and for 100,000 households to 4100 euros (162.1 euros/kW_th and 4100 euros/kW_e). These calculations were made for fixed gas and electricity prices. The analysis also included cases of various changes in gas and energy prices. Faster growth of electricity prices than gas prices reduce the profitability barrier. In addition, a building located in Lesser Poland region was analyzed, with an above average demand for electricity and heat. Gas micro-cogeneration becomes profitable for this household at a price of 3700 euros (146.2 euros/kW_th and 3700 euros/kW_e) at fixed gas and electricity prices.

Changes observed in the Polish energy sector, including the demand for and use of heat, require the introduction of appropriate measures aimed at diversifying the available heat sources, increasing the share of renewable and low-emission sources in heat production, and increasing waste heat recovery and its usage. There is an increasing emphasis on issues such as reducing the carbon footprint, reducing pollution, reducing the use of raw materials, reducing waste heat, and improving the energy efficiency of businesses. Increasingly, the question arises—what technologies can be used as an answer to the identified problems and needs. The solution proposed in this publication to support these needs is the use of mobilized thermal energy storage (M-TES) technology. The use of this technology has great potential, but also involves a number of conditions that need to be taken into account when undertaking the design, construction, and use of this type of technology. The primary purpose of this publication is to provide a detailed description of mobilized thermal energy storage technology, together with a discussion of the various practical aspects associated with the design and use of M-TES. Technology was discussed both in terms of application, but also in terms of specific areas. In the first case—step-by-step, from the design stage to the end-of-life stage. In the second case—one area at a time, including: technical, legal, economic, and environmental. The discussion of the technology is preceded by an analysis of the existing solutions presented in this area. The state-of-the-art shows that, despite the growing interest in the subject, there are still a small number of solutions in this area that have been implemented and are in use. The conducted analysis shows that M-TES is a solution with great potential. However, it is necessary to develop it, especially in the technological, as well as economical, areas.

E3S Web of Conferences, open access proceedings in environment, energy and earth sciences

The global energy transition and increasingly rigorous legal regulations aimed at climate protection are driving the search for alternative energy sources, including renewable energy sources (RESs) and waste heat. However, the mismatch between supply and demand presents a significant challenge. Thermal energy storage (TES) technologies, particularly mobile thermal energy storage (M-TES), offer a potential solution to address this gap. M-TES can not only balance supply and demand but also facilitate the transportation of heat from the source to the recipient. This paper reviews the current state of M-TES technologies, focusing on their technology readiness level, key operating parameters, and advantages and disadvantages. It is found that M-TES can be based on sensible heat, latent heat, or thermochemical reactions, with the majority of research and projects centered around latent heat storage. Regarding the type of research, significant progress has been made at the laboratory and simulation levels, while real-world implementation remains limited, with few pilot projects and commercially available systems. Despite the limited number of real-world M-TES implementations, currently existing M-TES systems can store up to 5.4 MWh in temperatures ranging from 58 °C to as high as 1300 °C. These findings highlight the potential of the M-TES and offer data for technology selection, simultaneously indicating the research gaps and future research directions.