The use of loess as an earthen final cover material is promising in northwest China which has an arid and semi-arid climate. A full-scale testing facility
Landfill storage capacity and slope stability are among the most significant engineering concerns in municipal solid waste (MSW) landfill operation. Factors that affect the landfill storage capacity and slope stability are interrelated. Research on the effects of settlement on the landfill storage capacity and stability is insufficient. In this article, storage capacity and slope stability analysis of MSW landfills was conducted on a typical valley-type landfill. A practical approach was utilized to obtain the landfill settlement and storage capacity with the one-dimensional compression model that considered different MSW compression mechanisms and the compressibility property of MSW. The influences of settlement over time on the landfill storage capacity and stability were reflected by changing the landfill scheme and the MSW property including shear strength and bulk unit weight. The factor of safety of the deformed landfill slope was estimated by the limit-equilibrium method with consideration of varied bulk unit weight and shear strength indices for MSW with a high food waste content. The quantitative effects of operational practices, including MSW filling rate, final height of MSW body, designed front slope angle and main leachate level, on the landfill storage capacity and stability were investigated. The results showed that: (1) the main leachate level is of importance to the landfill storage capacity and stability; (2) reducing the filling rate of MSW has multiple advantages: the requirement to control the main leachate level thickness in the MSW body can be diminished, more waste can be filled, and the stability of landfills can be sustained; (3) although the landfill storage capacity can be effectively improved by increasing the height of the MSW body, at the same time, it becomes more important to control the main leachate level in the MSW body to sustain the landfill stability; and (4) reducing the slope angle will help weaken the requirement of the main leachate level to sustain the landfill stability, but not necessarily decrease the landfill expansion ratio. In addition, the landfill stability assessment should be associated with the construction stage, because the factor of safety varies with time due to the development of landfill settlement and the biodegradation process.
Ensemble‐based methods have been widely used for characterization of model parameters. Due to their Monte Carlo nature, these methods can be easily implemented but usually need relatively large ensemble sizes to guarantee the accuracy, resulting in a high computational cost. To address this issue, we propose an adaptive multifidelity ensemble smoother for data assimilation, which takes advantage of both the accuracy of a high‐fidelity (HF) model and the efficiency of a low‐fidelity (LF) model. In this work, an ensemble smoother‐based multiple data assimilation scheme is employed. In the forecast step, a large number of LF simulations and a small number of HF simulations are implemented. By exploring the correlations between the predictions of HF and LF models, a multifidelity Gaussian process is established to serve as a surrogate for the original system without sacrificing accuracy. To consider the surrogate errors and avoid the underestimation of uncertainties in the analysis step, the ensemble smoother‐based multiple data assimilation scheme is amended with extra iterations. After each analysis step, the multifidelity Gaussian process surrogate is locally refined in the posterior region. In summary, the expensive HF model evaluations are implemented only if necessary. The efficiency of the proposed method is illustrated by a synthetic case and a real‐world experiment. It is shown that even though the majority of model evaluations are implemented using the LF models in an adaptive multifidelity ensemble smoother, the accuracy is not sacrificed. The proposed multifidelity framework is with the general applicability since it can be equally combined with other ensemble‐based data assimilation methods.