A single cylinder engine was modified to study the potential of reducing fuel consumption and emissions in stratified, direct injection, spark ignition engines with the use of air-assisted nozzles. The spray angle of the nozzle was varied (60° and 90°), and two injection strategies were investigated: (I) the fuel was injected in the nozzle prior to transportation into the chamber via the air flow and (II) the fuel was injected directly into the air flow. The results of the engine experiments were compared with the spray characteristic of each configuration. To facilitate the comparison, two-dimensional images of the sprays were recorded under atmospheric conditions. The fuel was visualized using Planar Laser-Induced Fluorescence (PLIF). The optical chamber was equipped with three optical accesses and a standard injection system from a production engine. The temporal and spatial developments of the spray were investigated for different types of nozzles and for the various injection strategies in both the optical chamber and the engine. By varying the spray angle, the characteristics of the spray changed. Nozzles with smaller spray angles demonstrated more compact sprays, nozzles with greater angles demonstrated a hollow cone spray. The only experiments giving a homogeneous mixture were the engine experiments with the 60°-nozzle and injection into the intake stroke. Using the 90°-injector the fuel distribution prior to ignition was inhomogeneous and high cycle-to-cycle fluctuations were observed.
13 January 2022 in IEEE Transactions on Biomedical Engineering
Objective: Decellularizing solid organs is a promising top-down process to produce acellular bio-scaffolds for ‘de novo’ regrowth or application as tissue ‘patches’ that compensate, e.g., large volumetric muscle loss in reconstructive surgery. Therefore, generating standardized acellular muscle scaffolds marks a pressing area of need. Although animal muscle decellularization protocols were established, those are mostly manually performed and lack defined bioreactor environments and metrologies to assess decellularization quality in real-time. To close this gap, we engineered an automated bioreactor system to provide chemical decellularization solutions to immersed whole rat gastrocnemius medialis muscle through perfusion of the main feeding arteries. Results: Perfusion control is adjustable according to decellularization quality feedback. This was assessed both from (i) ex situ assessment of sarcomeres/nuclei through multiphoton fluorescence and label-free Second Harmonic Generation microscopy and DNA quantification, along with (ii) in situ within the bioreactor environment assessment of the sample’s passive mechanical elasticity. Conclusion: We find DNA and sarcomere-free constructs after 72 h of 0.1% SDS perfusion-decellularization. Furthermore, passive elasticity can be implemented as additional online decellularization quality measure, noting a threefold elasticity decrease in acellular constructs. Significance: Our MyoBio represents a novel and useful automated bioreactor environment for standardized and controlled generation of acellular whole muscle scaffolds as a valuable source for regenerative medicine.
Muscle biomechanics relies on active motor protein assembly and passive strain transmission through cytoskeletal structures. The desmin filament network aligns myofibrils at the z-discs, provides nuclear–sarcolemmal anchorage and may also serve as memory for muscle repositioning following large strains. Our previous analyses of R349P desmin knock-in mice, an animal model for the human R350P desminopathy, already depicted pre-clinical changes in myofibrillar arrangement and increased fiber bundle stiffness. As the effect of R349P desmin on axial biomechanics in fully differentiated single muscle fibers is unknown, we used our MyoRobot to compare passive visco-elasticity and active contractile biomechanics in single fibers from fast- and slow-twitch muscles from adult to senile mice, hetero- or homozygous for the R349P desmin mutation with wild type littermates. We demonstrate that R349P desmin presence predominantly increased axial stiffness in both muscle types with a pre-aged phenotype over wild type fibers. Axial viscosity and Ca-mediated force were largely unaffected. Mutant single fibers showed tendencies towards faster unloaded shortening over wild type fibers. Effects of aging seen in the wild type appeared earlier in the mutant desmin fibers. Our single-fiber experiments, free of extracellular matrix, suggest that compromised muscle biomechanics is not exclusively attributed to fibrosis but also originates from an impaired intermediate filament network.
Duchenne muscular dystrophy (DMD) is a degenerative genetic myopathy characterized by complete absence of dystrophin. Although the mdx mouse lacks dystrophin, its phenotype is milder compared to DMD patients. The incorporation of a null mutation in the Cmah gene led to a more DMD-like phenotype (i.e., more fibrosis). Although fibrosis is thought to be the major determinant of ‘structural weakness’, intracellular remodeling of myofibrillar geometry was shown to be a major cellular determinant thereof. To dissect the respective contribution to muscle weakness, we assessed biomechanics and extra- and intracellular architecture of whole muscle and single fibers from extensor digitorum longus (EDL) and diaphragm. Despite increased collagen contents in both muscles, passive stiffness in mdx Cmah diaphragm was similar to wt mice (EDL muscles were twice as stiff). Isometric twitch and tetanic stresses were 50% reduced in mdx Cmah diaphragm (15% in EDL). Myofibrillar architecture was severely compromised in mdx Cmah single fibers of both muscle types, but more pronounced in diaphragm. Our results show that the mdx Cmah genotype reproduces DMD-like fibrosis but is not associated with changes in passive visco-elastic muscle stiffness. Furthermore, detriments in active isometric force are compatible with the pronounced myofibrillar disarray of the dystrophic background.
16 June 2021 in IEEE Transactions on Biomedical Engineering
Objective: Muscle biomechanics is set by the spacing of repetitive striation patterns of individual sarcomeres within single muscle fibres of stacked myofibrils. Sarcomere lengths (SL) are rather unequally distributed than of equal distance. This non-uniformity may affect both, force production as well as passive-elastic deformation. However, online recording of SL during axially imposed strains is cumbersome due to a lack of compact technologies. Methods: To fuse SL pattern recognition with restoration force assessments during quasi-static axial stretch, we implemented live tracking of SL distributions simultaneous to voice-coil actuated stretch and restoration force recordings in our MyoRobot 2.0 automated biomechatronics platform. Both were obtained online during stretch-relaxation cycles of murine single muscle fibres. Results: Under quasi-static stretch conditions ( $\sim$ 1 $\mu$ m/s fibre length changes), almost no apparent hysteresis was detected in single fibres. SL showed a non-uniform distribution. While mean SL varied between 2.6 $\mu$ m and 3.4 $\mu$ m upon 140% stretch, two populations of fibres were noticed: one showing a minor change in SL distribution with stretch, and one becoming more equally distributed upon stretch. Conclusion: A roughly 5% SL variability under rest either diminishes or remains almost unaltered upon elastic axial deformation. This may reflect differential impact of mostly extra-sarcomeric components to stretch in this stretch range. Significance: The augmented functionality of the MyoRobot 2.0 towards online sarcomere analyses within single fibres shall provide a valuable tool for the muscle community to study the contribution of serial elastic and force producing elements in health and disease models.