Recently, High entropy alloys (HEAs) advanced into high-temperature applications as potential candidates by enduring high temperatures with high thermal stability, higher oxidation and corrosion resistances, thermal fatigue, and creep resistances. HEAs acquire unique characteristics called core effects of HEAs: high entropy effect, sluggish diffusion effect, severe lattice distortion, and cocktail effect. HEAs frequently exhibit remarkable properties because of having such unique core effects. Thus, the emergence of HEAs has gained significant interest in the field of materials leading to a contemporary point of discussion on their exciting nature and properties. The current review article intends to summarize the significant works on the oxidation behavior of High entropy alloys (HEAs). Also, peculiar attention has been invested in comprehending oxidation behavior of HEAs in the viewpoint of the crystal structure that is BCC-HEAs, FCC-HEAs and few case studies were compared with the conventional alloys. Current challenges and essential future directions in this field are also pointed out.
1 November 2020 in Materials Science and Engineering: A
Mechanical properties relating to the thermally activated process of yielding was investigated in Ti–6Al–4V with a bimodal microstructure, consisting of both primary alpha grains and lamellar colonies of secondary alpha/beta lamellae. The temperature dependence of yield stress, effective stress, activation volume, and activation enthalpy were investigated between 77 K and 650 K. The yield stress and effective stress decreased with increasing temperature. It was found that the temperature dependence of activation enthalpy for yielding shows values between those obtained from basal slips and prismatic slips investigated in single crystalline α-titanium. This suggests that the thermally activated processes which control the yielding of bimodal Ti–6Al–4V is the combination of basal and prismatic slips.
In this paper we introduce Shape Memory Alloy (SMA) for designing the tibial part of Total Knee Arthroplasty (TKA) by exploiting the shape-memory and pseudo-elasticity property of the SMA (e.g. NiTi). This would eliminate the drawbacks of the state-of-the art PMMA based knee-spacer including fracture, sustainability, dislocation, tilting, translation and subluxation for tackling the Osteoarthritis especially for the aged people of 45-plus or the athletes. In this paper a Computer Aided Design (CAD) model using SolidWorks for the knee-spacer is presented based on the proposed SMA adopting the state-of-the art industry-standard geometry that is used in the PMMA based spacer design. Subsequently Ansys based Finite Element Analysis is carried out to measure and compare the performance between the proposed SMA based model with the state-of-the art PMMA ones. 81% more bending is noticed in the PMMA based spacer compared to the proposed SMA that would eventually cause fracture and tilting or translation of spacer. Permanent shape deformation of approximately 58.75% in PMMA based spacer is observed compared to recoverable 11% deformation in SMA when same load is applied on both separately.
1 January 2019 in International Journal of ChemTech Research