We present the main features of CITIUS, a new light source for ultrafast science, generating tunable, intense, femtosecond pulses in the spectral range from infrared to extreme ultraviolet (XUV). The XUV pulses (about 105-108 photons/pulse in the range 14-80 eV) are produced by laser-induced high-order harmonic generation in gas. This radiation is monochromatized by a time-preserving monochromator, also allowing one to work with high-resolution bandwidth selection. The tunable IR-UV pulses (1012-1015 photons/pulse in the range 0.4-5.6 eV) are generated by an optical parametric amplifier, which is driven by a fraction of the same laser pulse that generates high order harmonics. The IR-UV and XUV pulses follow different optical paths and are eventually recombined on the sample for pump-probe experiments. We also present the results of two pump-probe experiments: with the first one, we fully characterized the temporal duration of harmonic pulses in the time-preserving configuration; with the second one, we demonstrated the possibility of using CITIUS for selective investigation of the ultra-fast dynamics of different elements in a magnetic compound.

This research article examines the application of various methods to determine the effective elastic properties of beech veneer-wood composites. Using laminate theory, the theoretically calculated effective values of the in-plane and out-of-plane modulus of elasticity as well as shear modulus are compared with the values determined from the natural frequencies of flexural, torsional and longitudinal vibrations of samples having different orientations and numbers of composite layers. The samples are also modelled using the finite element method, and their natural frequencies are calculated by the modal analysis. Research has shown that the laminate theory, which is well established and applied in the world of synthetic composites, can also be applied to beech plywood composites, where the theoretically calculated effective values can be up to 15% higher. Similarly, due to the higher calculated effective elastic properties, higher natural frequencies of flexural, torsional and longitudinal vibrations are also calculated by the finite element method.

In composite materials, the use of failure criteria is necessary to determine the failure forces. Various failure criteria are known, from the simplest ones that compare individual stresses with the corresponding strength, to more complex ones that take into account the sign and direction of the stress, as well as mutual interactions of the acting stresses. This study investigates the application of the maximum stress, Tsai-Hill, Tsai-Wu, Puck, Hoffman and Hashin criteria to beech plywood made from a series of plies of differently oriented beech veneers. Specimens were cut from the manufactured boards at various angles and loaded by bending to failure. The mechanical properties of the beech veneer were also determined. The specimens were modelled using the finite element method with a composite modulus and considering the different failure criteria where the failure forces were calculated and compared with the measured values. It was found that the calculated forces based on all failure criteria were lower than those measured experimentally. The forces determined using the maximum stress criterion showed the best agreement between the calculated and measured forces.

This article investigates the quality of the machining surface of the five most common invasive tree species in Slovenia, i.e., black locust (Robinia pseudoacacia L.), boxelder maple (Acer negundo L.), horse chestnut (Aesculus hippocastanum), honey locust (Gleditsia triacanthos) and tree of heaven (Ailanthus altissima). The machining tests were made according to the American Society for Testing and Materials (ASTM) D1666-17 standard, where the quality of the surfaces after planing, routing and turning were evaluated with visual assessment, and the area and profile roughness parameters were also determined on selected specimens. The results showed that boxelder maple, horse chestnut and honey locust can be machined very well in all the studied operations, with the best results in routing and a little less good by turning, whereas the tree of heaven had the best quality in planing, and the worst by turning. Among all studied tree species, the black locust had the worst quality in planing, but the quality at routing was very similar to other tested species. The research also showed that there is little or no significant relationship between the qualities of the various types of machining for tested tree species.