The development of an effective microstructure design method for multicomponent alloys is of considerable importance for improving both the design of alloys and the design of processes for producing alloys with unique properties. The coupling of the phase-field method and the calculation of phase diagrams (CALPHAD) method can be used for predicting the evolution of microstructures in multicomponent alloys. Such predictions make use of CALPHAD thermodynamic information with the chemical free energy function in the phase-field method. This article reviews several of these coupling methods, focusing on solid-state phase transformations in multicomponent systems, such as phase separation and disordered or ordered phase precipitation from a matrix. When calculating disordered phase transformations, the Gibbs energy function derived from the CALPHAD database can be used directly in the phase-field method. On the other hand, when dealing with an order/disorder transition, the degrees of freedom of the element site fraction for an ordered phase in the CALPHAD method can be reduced using the Gibbs energy single formalism for constituent phases, by using a database that stores the Gibbs energy and chemical equilibrium conditions, or by obtaining the driving force calculated using the Thermo-Calc software. The current status and future directions for further development of these coupled methods are discussed.
In this study, the role of a scan strategy in the fabrication of a single crystal (SX) structure of face-centered cubic (fcc) pure Ni using a flat-top laser profile by a laser powder bed fusion (LPBF) process was investigated. A flat-top laser with a uniform heat intensity across the beam profile was employed to fabricate the SX structure with a texture parallel to the build direction (║BD). A meander scan strategy with an XY–90° scan rotation was required to achieve the flat-top-derived SX structure. The meander scanning strategy promoted the epitaxial fcc growth along the direction ║BD, leading to the ║BD texture formation. Meanwhile, the XY–90° scan rotation induced the epitaxial growth of fcc phase on the hatch direction (HD)–scan direction (SD) plane in the direction deviated by approximately 45° relative to the SD. This 45° deviation relative to the SD occurred to accommodate the beam movement and the circular beam geometry on the HD – SD plane, resulting in the preferred configurations of ║SD and HD. Thus, this paper reports the importance of meander scanning with a 90° scan-rotation strategy to yield a flat-top-LPBF-derived SX structure with ║BD and ║SD and HD textures. GRAPHICAL ABSTRACT