The brown or grayish-white color films were prepared by the micro-arc oxidation (MAO) method on in-situ TiB2/7050Al composites using these alkaline electrolytes with/without KMnO4 as an additive. The microstructure, elemental composition, chemical state and corrosion behavior have been investigated by the microstructure characterizations and electrochemistry measurements on the MAO films comparatively. The results indicated that a brown film was obtained via adding KMnO4 into the alkaline electrolyte. The coloration mechanism of the brown color can be ascribed to the existence of MnO inside the film. Furthermore, the initiation of corrosion to the Al composite was intensively hindered by the brown MAO film. Compared with the Al substrate and grayish-white film, the brown MAO film exhibited the elevated corrosion potential and reduced corrosion current. Therefore, the brown film has presented an optimized corrosion resistance for the composite.
In this study, the effects of particle distribution and anodizing time on the microstructure and corrosion resistance of the TiB2 particle-reinforced Al-Zn-Mg-Cu composite were investigated. Relationships between TiB2 particle distribution, anodizing time, coating growth rule, and corrosion resistance were characterized and discussed using an optical microscope, a scanning electron microscope, an electrochemical test, and a salt spray test. Dispersion of TiB2 particles by powder metallurgy improved the corrosion resistance of the anodized coating on composites. Compared with the matrix, the corrosion potential (Ecorr) of the anodized coating shifted to the positive direction, and the corrosion current density (icorr) decreased. Meanwhile, the icorr of the coating decreased initially and then increased with the extension of the anodization time. The corrosion resistance of the coating was optimal at an anodization time of 20 min. The corrosion resistance of the composite was determined by both the porosity and thickness of the coating. Additionally, all samples treated by potassium dichromate sealing had no corrosion points after a 336-h salt spray test, demonstrating an excellent corrosion resistance suitable for harsh environmental applications in industry.