To achieve highly efficient mesoscopic perovskite solar cells (PSCs), the structure and properties of an electron transport layer (ETL) or material (ETM) have been shown to be of supreme importance. Particularly, the core–shell heterostructured mesoscopic ETM architecture has been recognized as a successful electrode design, because of its large internal surface area, superior light-harvesting efficiency and its ability to achieve fast charge transport. Here we report the successful fabrication of a hysteresis-free, 15.3% efficient PSC using vertically aligned ZnO nanorod/TiO2 shell (ZNR/TS) core–shell heterostructured ETMs for the first time. We have also added a conjugated polyelectrolyte polymer into the growth solution to promote the growth of high aspect ratio (AR) ZNRs and substantially improve the infiltration of the perovskite light absorber into the ETM. The PSCs based on the as-synthesized core–shell ZnO/TiO2 heterostructured ETMs exhibited excellent performance enhancement credited to the superior light harvesting capability, larger surface area, prolonged charge-transport pathways and lower recombination rate. The unique ETM design together with minimal hysteresis introduces core–shell ZnO/TiO2 heterostructures as a promising mesoscopic electrode approach for the fabrication of efficient PSCs.
18 June 2014 in ACS Applied Materials & Interfaces
Thermal Chemical Vapor Deposition (CVD) deposited Titanium dioxide nanostructures (TiO2-NSs) were grown by using Ti powder and O2 precursors on Si/SiO2 (100) substrate. The microstructure and vibration properties of TiO2-NSs were characterized by Fourier transform infrared (FTIR), SEM, and photoluminescence (PL) spectroscopy. The role of O2 flow rate on TiO2-NSs revealed decreased deposition rate, however, surface roughness has been increased resulted into formation of nanostructure thin films.
In this report, we report the fabrication of a large grain and high crystallinity perovskite film by combined ultraviolet-ozone (UVO) and thermal treatment of formamidinium iodide solution during the fabrication of formamidinium lead halide (FAPbI2.6Br0.3Cl0.1) films by a two-step deposition method. In this process, lead halide films were treated with UVO-treated FAI at different times. In addition, we have observed that hot-casting of UVO-assisted FAI nucleates the alpha-FAPbI3 phase in as-prepared films. Again, we observed that the annealed hot-cast UVO-assisted FAI increased the grain size and crystallinity in the films. It was observed that the perovskite film fabricated using 10 min UVO-treated FAI solution shows the highest power conversion efficiency (PCE) up to 17.74%. Furthermore, the perovskite film fabricated with the hot-cast at 120 degrees C with the 10 min UVO-treated FAI solution improved the PCE to 19.22%. This finding would help with fabrication of large grain, smooth, uniform, and pinhole perovskite films by combining UVO and thermally assisted FAI solution.