Seismic microzonation is a process of estimating site-specific effects due to an earthquake on urban centers for its disaster mitigation and management. The state of West Bengal, located in the western foreland of the Assam–Arakan Orogenic Belt, the Himalayan foothills and Surma Valley, has been struck by several devastating earthquakes in the past, indicating the need for a seismotectonic review of the province, especially in light of probable seismic threat to its capital city of Kolkata, which is a major industrial and commercial hub in the eastern and northeastern region of India. A synoptic probabilistic seismic hazard model of Kolkata is initially generated at engineering bedrock (Vs30 ~ 760 m s−1) considering 33 polygonal seismogenic sources at two hypocentral depth ranges, 0–25 and 25–70 km; 158 tectonic sources; appropriate seismicity modeling; 14 ground motion prediction equations for three seismotectonic provinces, viz. the east-central Himalaya, the Bengal Basin and Northeast India selected through suitability testing; and appropriate weighting in a logic tree framework. Site classification of Kolkata performed following in-depth geophysical and geotechnical investigations places the city in D1, D2, D3 and E classes. Probabilistic seismic hazard assessment at a surface-consistent level – i.e., the local seismic hazard related to site amplification performed by propagating the bedrock ground motion with 10% probability of exceedance in 50 years through a 1-D sediment column using an equivalent linear analysis – predicts a peak ground acceleration (PGA) range from 0.176 to 0.253 g in the city. A deterministic liquefaction scenario in terms of spatial distribution of liquefaction potential index corresponding to surface PGA distribution places 50% of the city in the possible liquefiable zone. A multicriteria seismic hazard microzonation framework is proposed for judicious integration of multiple themes, namely PGA at the surface, liquefaction potential index, NEHRP soil site class, sediment class, geomorphology and ground water table in a fuzzy protocol in the geographical information system by adopting an analytical hierarchal process. The resulting high-resolution surface consistent hazard, liquefaction and microzonation maps are expected to play vital roles in earthquake-related disaster mitigation and management of the city of Kolkata.
2 June 2015 in Natural Hazards and Earth System Sciences
The city of Kolkata is one of the most urbanized and densely populated regions in the world and a major industrial and commercial hub of the eastern and northeastern region of India. In order to classify the seismic risk zones of Kolkata we used seismic hazard exposures on the vulnerability components, namely land use/land cover, population density, building typology, age and height. We microzoned seismic hazard of the city by integrating seismological, geological and geotechnical themes in GIS, which in turn are integrated with the vulnerability components in a logic-tree framework for the estimation of both the socioeconomic and structural risk of the city. In both the risk maps, three broad zones have been demarcated as "severe", "high" and "moderate". There had also been a risk-free zone in the city that is termed as "low". The damage distribution in the city due to the 1934 Bihar–Nepal earthquake of Mw = 8.1 matches satisfactorily well with the demarcated risk regime. The design horizontal seismic coefficients for the city have been worked out for all the fundamental periods that indicate suitability for "A", "B" and "C" type of structures. The cumulative damage probabilities in terms of "none", "slight", "moderate", "extensive" and "complete" have also been assessed for the predominantly four model building types viz. RM2L, RM2M, URML and URMM for each seismic structural risk zone in the city. Both the seismic hazard and risk maps are expected to play vital roles in the earthquake-inflicted disaster mitigation and management of the city of Kolkata.
In the summer of 1995, surface measurements of shear wave velocity (β) was conducted at thirty six sites, approximately, in the 0‐50 m depth range. Of these, at seven sites values of β, soil log and blow count (N) from borehole measurement were available from previous investigations by others. Using these seven sites for calibration, we compared the velocity profiles yielded by the surface and borehole measurements for these sites. The results show broad similarities. Using the soil logs and shear wave velocity variations at the seven sites, four site classes (SC‐Ic, SC‐II, SC‐III and SC‐IV) could be identified. The surface method corresponding to the mean value of β tends to underestimate β between about 1 and 18 percent for site classes SC‐Ic, SC‐II and SC‐III compared to the downhole method. For SC‐IV, β is overestimated by 11 percent using surface method. Moreover, the blow count (N) data for each site class shows a linear relationship with β obtained by the surface measurement.