A high-efficiency method to deal with pollutants must be found because environmental problems are becoming more serious. Photocatalytic oxidation technology as the environmentally-friendly treatment method can completely oxidate organic pollutants into pollution-free small-molecule inorganic substances without causing secondary pollution. As a widely used photocatalyst, titanium dioxide (TiO2) can greatly improve the degradation efficiency of pollutants, but several problems are noted in its practical application. TiO2 modified by different materials has received extensive attention in the field of photocatalysis because of its excellent physical and chemical properties compared with pure TiO2. In this review, we discuss the use of different materials for TiO2 modification, highlighting recent developments in the synthesis and application of TiO2 composites using different materials. Materials discussed in the article can be divided into nonmetallic and metallic. Mechanisms of how to improve catalytic performance of TiO2 after modification are discussed, and the future development of modified TiO2 is prospected.
Microbial electrochemical systems (MESs) can harvest bioelectricity from varieties of organic matter in wastewater through electroactive microorganisms. Oxygen reduction reaction (ORR) in a cathode plays an important role in guaranteeing high power generation, which can be enhanced by cathode catalysts. Herein, the tiny crystalline grain nanocrystal NiCo2O4 is prepared via the economic method and utilized as an effective catalyst in air–cathode MESs. The linear sweep voltammetry results indicate that the current density of 2% nano-NiCo2O4/AC cathode (5.05 A/m2) at 0 V increases by 20% compared to the control (4.21 A/m2). The cyclic voltammetries (CVs) and the electrochemical impedance spectroscopy (EIS) showed that the addition of nano-NiCo2O4 (2%) is efficient in boosting the redox activity. The polarization curves showed that the MESs with 2% nano-NiCo2O4/AC achieved the highest maximum power density (1661 ± 28 mW/m2), which was 1.11 and 1.22 times as much as that of AC and 5% nano-NiCo2O4. Moreover, the adulteration of nano-NiCo2O4 with a content of 2% can not only enable the electrical activity of the electrode to be more stable, but also reduce the cost for the same power generation in MESs. The synthetic nano-NiCo2O4 undoubtedly has great benefits for large-scale MESs in wastewater treatment.