Since most goods are transported and stored in a unit-load form in today’s global supply chain, there has been a growing concern regarding the compression strength of corrugated paperboard boxes for packaging of agricultural products. The best predictor of the compression strength of corrugated boxes is the edgewise compression test (ECT) value; therefore, its efficient measurement or prediction is crucial for the design of more efficient corrugated boxes for food and agricultural and industrial products. This study investigated the edgewise compression behavior (load vs. displacement plot, ECT, and failure mechanism) of corrugated paperboard based on different types of testing standards and flute types using finite element analysis (FEA) and experimental analysis. The results of this study showed that the magnitude of the ECT values produced by the FEA was different from the values produced by the experiment. The difference in the ECT can be possibly explained by layer thickness approximations, together with glue line width assumptions between fluting and the liners in the numerical models. However, the trends of the values were the same. If the material properties of corrugated paperboard components and modeling methods of the corrugated paperboard are further studied, the FE (finite element)-based simulation technique will be a useful alternative tool that can replace the edgewise compression test.
Among the horticulture facilities in Korea, the hydroponic cultivation method has been increasingly used. This study aimed to identify fungi and bacterial species in hydroponic cultivation and highlight the need for sterilization to recycle the discharged drainage. Samples were collected from a number of paprika, tomato, and strawberry hydroponic greenhouses. Vinyl and glass greenhouses were studied, and the drainage discharge was of two types: direct discharge and collection after discharge. In total, 24 fungal and six bacterial species were detected from 399 and 151 densities, respectively. The primary fungal and bacterial species identified were from the genera Fusarium, Pythium, and Phytophthora as well as Agrobacterium and Pseudomonas. Statistical analysis revealed that the species number and density of fungi and bacteria were higher in strawberry than in tomato or paprika. These values were higher for vinyl greenhouses than for glass greenhouses. This study on the reuse of drainage from hydroponic greenhouses may contribute to the recycling of resources and reduction in water pollutant emission; this will thus help us to implement sustainable horticulture practices.
This study surveyed the most commonly observed plants at 40 pond wetlands in rural villages in Korea and assessed their use patterns in traditional medicine (TM) with reference to the contents of the Korea Traditional Knowledge Portal (KTKP). In this survey, 457 taxa in 108 families were identified. For these, there are use patterns in TM for 314 taxa; overall, 68.8% of the surveyed plants have uses in TM. The 314 taxa that have applications in TM involve 596 types of disease treatment and 771 types of efficacy. On average, for each taxon, there are 4.0 types of efficacy and 6.6 types of disease treatment. TM from 210 taxa have been described as applied to organs in 10 regions of the body: liver 123, lung 82, spleen 57, stomach 57, heart 45, large intestine 43, kidney 40, bladder 23, small intestine 16, and gall bladder 8. The results of this study will help support the conservation of pond wetlands that provide national biodiversity and various ecosystem services, by increasing the recognized value of pond wetlands even when they are no longer used in farming. Thus, this study can support educational materials for eco-experience and can be applied in the conservation of Korean pond wetlands.
31 January 2023 in Journal of Bio-Environment Control
This study was conducted to develop a precision automatic irrigation system in a nursery by considering the problems and improvements of manual and the conventional automatic irrigation system. The amount of irrigated water between the conventional automatic irrigation system and manual irrigation was 28.7 ± 4.4 g and 14.2 ± 4.3 g, respectively, and the coefficient of variation was less than 30%. However, the coefficient of variation of the conventional automatic irrigation system of 15%, was higher than that of manual irrigation of 30%. The irrigation test using the developed uniform irrigation system attached with the nozzle of a spray angle 80° and most highest uniformity was at height 600 mm. And coefficient of variation of the irrigation uniformity at the center part was within 20%, but irrigation amount of the edge part was lower 50% and over compared to the center part. As a result of a tomato grafting seedling cultivation test using the developed uniform irrigation system, the average plant height of seedling at the edge part was 28 mm but plant height at the center part was higher as 72 mm. Therefore, it was necessary to apply additional irrigation device at the edge part. The irrigation uniformity of the edge concentrated irrigation system was investigated that the irrigation amount of the edge part was irrigated by more than 50% compared with the center part, and coefficient of variation of the irrigation amount at the center part was less than 30%. As a result of a cucumber grafting seedling cultivation test using the edge concentrated irrigation system, the plant height of seedlings in the edge and central part of cultivation bed were 24% and 26%, respectively, so irrigation uniformity was higher then the uniform irrigation system. In order to improve the uniformity of seedlings, it is necessary to adjust the height of boom according to the growth of the seedling by installing a distance sensor in the overhead watering and boom irrigation system.
1 July 2017 in Protected Horticulture and Plant Factory