CD-Laboratory for Sediment research and management, Institute for Hydraulic Engineering and River Research, Department for Water-Atmosphere-Environment, BOKU-University of Natural Resources and Life Sciences Vienna, Muthgasse 18, 1190 Vienna, Austria
Dr. Thomas Gold
CD-Laboratory for Sediment research and management, Institute for Hydraulic Engineering and River Research, Department for Water-Atmosphere-Environment, BOKU-University of Natural Resources and Life Sciences Vienna, Muthgasse 18, 1190 Vienna, Austria
During its history, the Kuomintang (KMT) state has experienced something of a roller coaster ride. Although the mainland was officially the KMT’s Republic of China for much of the first half of the 20th century, in truth the KMT state was little more than the primus inter pares of several contending warlord powers. It had little ability to impose its authority over much more of China’s vast territory than its base in the Yangtzi Delta. Its social foundation was very thin. The party-state itself was seriously factionalized, and the supreme leader, Generalissimo Chiang Kai-shek, preferred to keep his minions divided and competing with each other in order to strengthen his personal power rather than to forge a strong unified force.1 The KMT’s mainland debacle in 1949 was hardly surprising, especially in the face of the vastly superior organization and motivation of the Communists.
This study concerns scaled physical model tests of the delta formation process at the head of a run-of-river hydropower plant (RoR). It forms part of a larger research project to provide a scientific base for RoR sediment management strategies in medium-sized gravel bed rivers. The physical model consisted of an idealized river having a width of 20 m, a mean slope of 0.005, a mean flow rate of 22 m3/s and a 1-year flood flow of 104 m3/s. The model scale was 1:20. For the experiments, five different grain sizes were used, covering a range of 14 to 120 mm at 1:1 scale. Experiments were carried out under mobile-bed conditions at flow rates which correspond to 50%–80% of a 1-year flood HQ1. Even at the head of the reservoir, which is least influenced by the backwater effect of the RoR, sediment transport practically ceases for sediment fractions >14 mm for a flow rate of 0.7 × HQ1. The whole sediment load coming from the undisturbed upstream section accumulates at the head of the reservoir. This delta formation is accompanied by a substantial rise in water levels. A spatio-temporal scheme of the delta formation was derived from the experiments. The study proved that the delta formation increases the flood risk at the head of the reservoir. Conversely, reservoir drawdowns at flood events of high probability may be a promising strategy to enhance sediment connectivity under the specified boundary conditions.
The vortex shedding topology of a heavy pendulum oscillating in a dense fluid is investigated using time-resolved three-dimensional particle tracking velocimetry (tr-3-D-PTV). A series of experiments with eight different solid to fluid mass ratios $m^*$ in the range $[1.14, 14.95]$ and corresponding Reynolds numbers of up to $Re \sim O(10^4)$ was conducted. The period of oscillation depends heavily on $m^*$ . The relation between amplitude decay and oscillation frequency is non-monotonic, having a damping optimum at $m^* \approx 2.50$ . Moreover, a novel digital object tracking (DOT) method using vorticity-magnitude iso-surfaces is implemented to analyse vortical structures. A similar vortex shedding topology is observed for various mass ratios $m^*$ . Our observations show that first, a vortex ring in the pendulum's wake is formed. Soon after, the initial ring breaks down to two clearly distinguishable structures of similar size. One of the two vortices remains on the circular path of the pendulum, while the other detaches, propagates downwards, and eventually dissipates. The time when the first vortex is shed, and its initial propagation velocity, depend on $m^*$ and the momentum imparted by the spherical bob. The findings further show good agreement between the experimentally determined vortex shedding frequency and the theoretical vortex shedding time scale based on the Strouhal number.
The dynamic behavior of a subaqueous cylindrical pendulum and corresponding flow dynamics are investigated. The objectives were twofold: (i) to examine whether the two-dimensional model equations sufficiently capture the three-dimensional dynamics and (ii) to investigate the emerging three-dimensional vortical flow structures. Large eddy simulations with two-way coupling fluid structure interaction were carried out using the immersed boundary method to simulate the motion of the pendulum and its interactions with the initially stagnant water. The resulting pendulum motion is compared against measured data obtained in a series of experimental tests to validate the simulation results and the model equations with and without wake corrections. An analysis of the flow vorticity revealed the development of a vortex ring during the first swing and the formation of tip vortices. The evolution of the vortex rings emerging from the motion of the subaqueous cylindrical pendulum was visualized using Q-criteria showing a reasonable agreement with vortical structures observed in the experiment using particle imaging velocimetry. The hydrodynamic moments acting on the simulated pendulum and the moments calculated from the model equations are analyzed. Using the insights from these numerical simulations, a modification of the wake correction is proposed to enhance the accuracy of the rate of decay and period. The transient effect of coherent flow on pendulum dynamics, especially the added mass effect, is discussed.
Run-of-river hydropower plants (RoR HPPs) are capable of interrupting the sediment connectivity of many alpine rivers. Still, there is a lack of systematical investigations of possible sediment management strategies for small and medium sized RoR HPPs. This study deals with the headwater section of an impoundment and the approach of sediment remobilization during drawdown operations. Therefore, a typical medium sized gravel bed river having a width of 20 m, a mean bed slope of 0.005, a mean flow rate of 22 m3/s, and a 1-year flood flow of 104 m3/s is recreated by a 1:20 scaled physical model. Heterogenous sediment mixtures were used under mobile-bed conditions, representing a range of 14–120 mm in nature. During the experiments, the flow rate was set to be 70% of the 1-year flood (HQ1) regarding on the ability to mobilize all sediment fractions. The possibility to remobilize delta depositions by (partial) drawdown flushing within a reasonable period (≈9 h in 1:1 scale) was shown by the results. The erosion of existing headwater delta deposition was found to be retrogressive and twice as fast as the preceding delta formation process. A spatiotemporal erosion scheme points out these findings. This supports the strategy of a reservoir drawdown at flood events of high reoccurrence rate.
Periodic flushing operations during moderate flood events (≤annual flood flow HQ) are an approach to counteract problems caused by disturbed sediment continuity in rivers, which is possibly an effect of run-of-river hydropower plants (RoR-HPPs). Considering ecology, flood risk, technical, and economical reasons, discharge values of 0.7 × HQ are a good reference point for the initiation of gate operations. This work aimed to investigate the role of different gate opening actions on the effectiveness of such flushing measures. Physical model tests were performed, to capture bed load rates, together with 2D velocity measurements in the vicinity of two movable radial gates above a fixed weir. The length scale of the idealized model arrangement was 1:20, and a conveyor-belt sediment feeder was used to supply a heterogeneous sediment mixture. Velocities were acquired using 2D laser doppler velocimetry (LDV). Based on the LDV measurements, mean velocity profiles and Reynolds stresses were derived. The full opening of both radial gates led to the highest bed load mobility. While the flushing efficiency drastically decreased, even for slightly submerged gates, an asymmetrical gate opening initially led to the formation of a flushing cone in the vicinity of the weir, accompanied by temporarily high flushing efficiency. In conclusion, our results stress the importance of full drawdowns in successfully routing incoming bed load downstream of the HPP. However, the combination of an asymmetric gate opening followed by a full drawdown could be a promising approach to further improve the flushing efficiency of RoR-HPPs.