In the performance test of a compressor, the overstrain alarm of a rotor blade occurred and it was thought to be caused by a large-sized inlet probe. To explain and further avoid the occurrence of this phenomenon, the influences of probe strut configuration on the vibration strain of the compressor rotor blade and the corresponding flow mechanism are studied by using a one-way fluid-structure coupling calculation method. Firstly, the probe strut is simplified as a cylinder with a diameter of 10 mm and located upstream of the inlet stator with the strut wake impinging on the stator blade according to the compressor test. Then, the three scenarios are considered: moving the strut away from the stator blade in axial direction, shifting the strut half of the stator pitch circumferentially, and reducing the strut diameter. The analysis results show that the characteristics of blade vibration are determined by the excitation force on the rotor blade. Under the interaction between the large-sized strut and the compressor, in addition to the excitation force with the strut passing frequency, a force with a lower frequency, namely, the strut-wake-induced frequency, is also observed. The amplitude of the excitation force on the rotor blade depends on the probe configuration. When one of the excitation force frequencies is close to a natural frequency of the rotor blade, the blade resonates, and the amplitude of blade strain varies with the amplitude of the excitation force. In order to reduce the adverse effect of upstream strut wake on the compressor rotor blade vibration, the inlet probe strut should be designed with a smaller diameter and be placed further upstream of the stator in such a way that the strut wake vortex passes through the midpassage of the following stator.
12 April 2023 in International Journal of Aeronautical and Space Sciences
The flow inside a high-pressure turbine is a fully 3-D, unsteady flow, which has a great influence on the aero-thermal performance and structural strength of high-pressure turbines. In order to better understand the flow mechanism and guide the design of modern aero engines, the basic flow characteristics of transonic turbine are investigated in the present study. A modified scale-adaptive simulation (SAS) technique based on the shear stress transport (SST) turbulence model is applied here. Two test cases are carried out to assess the capability of the current model in predicting complex turbulent flows. The results show that the statistical parameters and flow structures of the modified SAS model are in good agreement with the large eddy simulation (LES) result and the experimental data, where the calculation time is significantly reduced compared to LES. In summary, the modified SAS method has demonstrated an excellent spatial resolution in unsteady simulations of turbomachinery, which shows the potential to be applied to realistic engineering applications.
Multi-frequency phase-lagged boundary condition has the advantage of reducing the computational domain to one single blade passage per row in unsteady flow simulation of a multistage turbomachinery, which saves the requirement of computer memory and time. The first part of the paper presents the implementation process of this approach in CFD code to predict unsteady flow field in multi-stage turbo-machinery. Unsteady simulations and steady simulations are then performed on a 3.5 stage compressor. Compared with the steady results, the compressor performance predicted by unsteady calculation match much better with the experimental data. The flow field of neighboring blade passages per row in compressor appears different due to the unsteady interaction of rotor and stator. The blade surface pressure distribution of middle stators fluctuate in large amplitude especially at the trailing edge of the stator. The interaction between stator blades and forward shock wave of the downstream rotor under small axial gap is the key factor of stator blade pressure fluctuation.