In this work, the synthesis and catalytic activity of thiol-functionalized copper-deposited porous carbon derived from dry oil palm leaves (Cu/TF-CNS) was investigated for the reduction of aromatic nitro compounds. The procedure to synthesize porous carbon nanospheres involves the pyrolysis of oil palm leaves in a nitrogen atmosphere at 1000 °C. The resulting porous carbon material was further functionalized with thiol groups to facilitate the uniform deposition of copper nanoparticles and serve as an efficient support. Excellent catalytic performance was shown by the Cu/TF-CNS catalyst in reducing aromatic nitro compounds to their corresponding aromatic amines with a low copper loading of only 4 mol% which is an inexpensive non-noble metal in the presence of NaBH4 as a reducing agent and EtOH/H2O as green solvents. The products were identified using 1H NMR spectroscopy. The catalyst was isolated from the reaction mixture and reused upto 10 cycles without any significant loss in the activity. The ICPAES analysis confirmed the successful incorporation of approximately 8.9% Cu during the deposition process and the reusability of the catalyst underscores its efficacy as a sustainable and effective heterogeneous catalyst for nitroarene reduction.
The development of high-performance and cost-effective electrocatalysts for water splitting is crucial for addressing the growing global energy demand and mitigating future energy crisis. In this study, a simple two-step strategy involving pyrolysis and chemical reduction was employed to synthesize a biomass-derived carbon-based electrocatalyst. Biowaste onion peel-based precursors synthesized at 1000 °C via pyrolysis showed the best performance as a support for transition metal borides in comparison with the same synthesized at temperatures of 600 and 800 °C. Furthermore, a series of carbon-supported metal boride catalysts, ON10/Co–B, ON10/Ni–B, and ON10/Fe–B, were synthesized and systematically tested for their electrochemical performance towards alkaline water splitting. Among the synthesized electrocatalysts, ON10/Co–B showed the best electrocatalytic activity with an overpotential of −122 mV for the HER at a current density of 10 mA cm−2. The catalyst ON10/Co–B also exhibited excellent stability for over 40 h and a durability for ∼1000 cycles in alkaline conditions. The enhanced electrocatalytic activity of ON10/Co–B for the HER is the result of the combined effect of the carbon support and Co–B. This work demonstrates the potential of biomass-derived carbon-supported transition metal borides as efficient and sustainable electrocatalysts for the HER.