Indoor air quality and thermal conditions are important considerations when designing indoor spaces to ensure occupant health, satisfaction, and productivity. Carbon dioxide (CO2) concentration and indoor air temperature are two measurable parameters to assess air quality and thermal conditions within a space. Occupants are progressively affected by the indoor environment as the time spent indoors prolongs. Specifically, there is an interest in carrying out investigations on the indoor environment through surveying existing Heating, Ventilation, Air Conditioning (HVAC) system operations in classrooms. Indoor air temperature and CO2 concentration in multiple lecture halls in Toronto, Canada were monitored; observations consistently show high indoor air temperature (overheating) and high CO2 concentration. One classroom is chosen as a representative case study for this paper. The results verify a strong correlation between the number of occupants and the increase in air temperature and CO2 concentration. Building Energy Simulation (BES) is used to investigate the causes of discomfort in the classroom, and to identify methods for regulating the temperature and CO2 concentration. This paper proposes retro-commissioning strategies that could be implemented in institutional buildings; specifically, the increase of outdoor airflow rate and the addition of occupancy-based pre-active HVAC system control. The proposed retrofit cases reduce the measured overheating in the classrooms by 2-3 °C (indoor temperature should be below 23 °C) and maintain CO2 concentration under 900 ppm (the CO2 threshold is 1000 ppm), showing promising improvements to a classroom’s thermal condition and indoor air quality.
In addition to building codes and regulations, voluntary housing certification standards also play an important role in the energy efficiency of housing. Each of these standards was established in response to a set of specific demands for high performance housing. Consequently, the energy conservation technologies and design approach applicable could be very diverse and dynamic. This paper is aimed to provide a comprehensive review for the state-of-the art housing standards with a focus on energy efficiency. It was observed that these standards normally evaluate energy efficiency based on percentage savings of the design with energy conservation measures compared to a reference case. The net-zero energy balance between energy consumption and on-site energy generation is considered the highest level of performance. This paper examines if this approach is adequate and prompts future research in order to improve the effectiveness of housing standards in defining sustainable housing.