Finding a reliable quality inspection system of resistance spot welding (RSW) has become a very important issue in the automobile industry. In this study, improvement in the quality estimation of the weld nugget’s surface on the car underbody is introduced using image processing methods and training a fuzzy inference system. Image segmentation, mathematical morphology (dilation and erosion), flood fill operation, least-squares fitting curve and some other new techniques such as location and value based selection of pixels are used to extract new geometrical characteristics from the weld nugget’s surface such as size and location, shape, and the numbers and areas of all side expulsions, peaks and troughs inside and outside the fusion zone. Topography of the weld nugget’s surface is created and shown as a 3D model based on the extracted geometrical characteristics from each spot. Extracted data is used to define input fuzzy functions for training a fuzzy logic inference system. Fuzzy logic rules are adopted based on knowledge database. The experiments are conducted on a 6 degree of freedom (DOF) robotic arm with a charge-coupled device (CCD) camera to collect pictures of various RSW locations on car underbodies. The results conclude that the estimation of the 3D model of the weld’s surface and weld’s quality can reach higher accuracy based on our proposed methods.

As an important form of additive manufacturing, welding is widely used in steel components welding work of construction, shipbuilding and other fields. In this study, an intelligent welding path generation algorithm based on multi-section interpolation is proposed in order to deal with non-standard multi-pass welding grooves which are difficult to be handled by automatic welding equipment in the construction site. Firstly, the non-standard grooves are classified and the reasons for their occurrence are discussed. Secondly, an automatic welding additive manufacturing system framework is discussed and an appropriate detection method is selected. Then, combining with the welding standard of non-standard grooves and the characteristics of the welding process, a multi-section interpolation-based welding path generation algorithm is proposed. Finally, a visual experiment platform was built to detection the typical non-standard groove and the welding experiment is implemented to verify the feasibility of the algorithm. According to the path generated by the algorithm, the welded steel components test plate meets the actual engineering standard after quality inspection. The experimental results and simulation results conclude the algorithm can be used to generate the welding path of the non-standard groove.