A novel piezoelectric-actuated rail-type mobile platform is proposed in this article, which has potential application in the inspection and maintenance tasks of the Tokamak vacuum vessel as it holds good environmental adaptability to extreme environments, such as strong magnetic fields, high vacuum, and high temperature. The rail-type piezoelectric-actuated mobile platform consists of a rail and a framed piezoelectric actuator operating with two orthogonal bending vibrations. The framed piezoelectric actuator moves on the rail by friction. At first, a semianalytical model is created for the framed piezoelectric actuator utilizing the transfer matrix method in order to reveal its dynamic behavior. Then, the prototype of the proposed framed piezoelectric actuator is manufactured and assembled, and its vibration characteristics are measured to verify the feasibility of the developed transfer matrix model. Additionally, the mechanical output performances of the rail-type mobile platform prototype are investigated experimentally, and it is observed that the maximum speed of the mobile platform prototype reached 384.68 mm/s when the amplitude of the driving voltage is 400 V pp , its maximum load-weight to self-weight ratio reached 7.6 when the excitation voltage is 300 V pp , its maximum output force is about 1.8 N under the excitation voltage of 400 V pp , and the minimum displacement resolution is 4 μ m when operated in the stepping mode. Finally, the extreme environment (temperature: 0–120 °C and vacuum: 3×10 −3 –10 5 Pa) tests are carried out to measure the output performances of the mobile platform prototype. The results show that the platform prototype is capable of carrying loads in a high-temperature and high-vacuum environment.
A novel traveling wave piezoelectric-actuated tracked mobile robot with potential application to robotic rovers was proposed and investigated in this study. The proposed tracked mobile robot is composed of a parallelogram-frame-structure piezoelectric transducer with four rings and a metal track. Utilizing the converse piezoelectric and friction effects, traveling waves were propagated in the rings and then the metal track was actuated by the piezoelectric transducer. Compared with traditional tracked mechanisms, the proposed tracked mobile robot has a simpler and more compact structure without lubricant, which eliminates the problem of lubricant volatilization and deflation, thus, it could be operated in the vacuum environment. Dynamic characteristics were simulated and measured to reveal the mechanism of actuating track of the piezoelectric transducer. Experimental investigations of the traveling wave piezoelectric-actuated tracked mobile robot were then carried out, and the results indicated that the robot prototype with a pair of exciting voltages of 460 V pp is able to achieve a maximum velocity of 57 mm s −1 moving on the foam plate and possesses the obstacle crossing capability with a maximum height of 27 mm. The proposed tracked mobile robot exhibits potential to be the driving system of robotic rovers.