With the rapid development of Internet of Things (IoT) technology, billions of Mobile Devices (MDs) are putting a massive burden on limited radio resources. Mobile edge computing (MEC) can save MDs’ energy consumption and relieve network pressure by offloading their tasks to edge servers. Compared with cloud servers, edge servers are closer to the users but have less storage capacity. The heterogeneous edge-cloud computing paradigm recently developed combines the advantages of both. In this architecture, edge servers provide powerful computing power, while the cloud provides sufficient storage capacity. Since many IoT devices in such a scenario are mobile, it is more practical to consider user mobility when optimizing the network. Besides, properly utilizing the mobility context can be beneficial for improving network performance as well. We focused on the edge-cloud collaborative computing scheme, as well as the joint optimization of power control, transmission scheduling, and offloading decisions among MDs and edge servers so as to minimize the total energy consumption of all MDs while considering user mobility. The problem was modeled as a Mixed-Integer Programming (MIP) optimization problem that provided the optimal solution. We also proposed a low-complexity heuristic algorithm. Simulations showed that the proposed edge-cloud collaborative scheme could significantly reduce the energy consumption of MDs compared with other schemes and demonstrated the importance of considering mobility awareness.
Mobility prediction is a powerful tool for network operators to optimize network performance. From cell level, if network operators know the cells to which the users will be connected in advance, wireless resources can be pre-allocated to improve network performance and better user experience can be provided in location-based services. Many next-cell prediction models and methods have been suggested and implemented. This article is devoted to next-cell prediction (cell level mobility prediction) in cellular networks, and provides a thorough survey of the prediction schemes and applications. Particularly, a two-level classification methodology was proposed and applied. We first divided the prediction schemes into three categories based on the mobility data used for prediction, i.e. Current Movement State based Approaches (CMSA), Historical Movement Pattern based Approaches (HMPA), and HybriD Approaches (HDA). Prediction schemes in each category were further classified based on the used prediction methods. The typical application scenarios were introduced as well, including handover management, resource allocation, etc. Finally, current challenges and potential trends in the near future were further discussed.
This study represents a self-consistent three-dimensional (3D) fluid plasma model coupled with Maxwell equations at an intermediate pressure between 1000 and 5000 Pa. The model was established using the finite element method to analyze the effects of time–space characteristics, which is the variation of plasma parameters with time and the 3D spatial distribution of plasma parameters in the plasma torch at various times. The numerical modeling was demonstrated in three different stages, where the growth of electron density is associated with time. From the distribution characteristics of molecular ions, it can be concluded that they are distributed mainly at the port of the quartz tube of the torch, which is larger than the center of the tube. The density ratio of molecular ion to electron is decreased because of the reduction of pressure and distance, which has been calculated from the port to the center of the quartz tube. The analysis of microwave plasma parameters indicated that intermediate pressure is useful for modeling and plasma source designing, especially for carbon dioxide conversion.
With the rapid development of 5G and the Internet of Things (IoT), cloud-based access mode is applied more and more in IoT scenarios. The emerging IoT applications put forward higher requirements on energy consumption and processing capacity of the network, as well as more strict privacy restrictions. The emergence of mobile edge computing solves the aforementioned user experience problems, which greatly improves execution efficiency and saves a lot of energy. However, existing studies pay more attention to issues such as energy consumption and delay, but ignore the privacy and imbalanced server load problems that mobile edge computing may cause. This paper made bandwidth resource allocation and task offloading decisions for multiple users via joint optimization, provided the privacy requirements of IoT terminals and load balancing requirements are satisfied. The objective was to minimize the total energy consumption of all terminal devices. By modeling the problem as an integer linear programming problem, the optimal solution is obtained. Considering the high computational complexity of solving integer linear programming problems, a more practical heuristic algorithm was proposed. The simulation results showed the effectiveness of the proposed optimal and heuristic schemes in reducing energy consumption, and demonstrated the importance of privacy protection.
A three-dimensional model is presented to investigate helium plasma generated by microwave under atmospheric pressure in this paper, which includes the physical processes of electromagnetic wave propagation, electron and heavy species transport, gas flow, and heat transfer. The model is based on the fluid approximation calculation and local thermodynamic equilibrium assumption. The simulation results demonstrate that the maxima of the electron density and gas temperature are 4.79 × 1017 m−3 and 1667 K, respectively, for the operating conditions with microwave power of 500 W, gas flow rate of 20 l/min, and initial gas temperature of 500 K. The electromagnetic field distribution in the plasma source is obtained by solving Helmholtz equation. Electric field strength of 2.97 × 104 V/m is obtained. There is a broad variation on microwave power, gas flow rate, and initial gas temperature to obtain deeper information about the changes of the electron density and gas temperature.