Several deconvolution methods have been proposed to reduce the mainlobe width and sidelobe intensity of conventional beamforming results without increasing the array aperture; however, most of them cannot perform well in the face of coherent targets. Therefore, it is discerning to deconvolve the complex-valued beamforming result rather than the beamforming intensity. However, conventional deconvolution methods focus on the beam intensity, and only a few studies have investigated complex-valued deconvolution beamforming (CDB). Considering the sparse property of the targets in practice, the CDB can be converted to a complex-valued inverse compressive sensing problem and put into the Bayesian framework. To solve it efficiently, a complex-valued relevance-vector-machine (RVM) tool is used to build the complex-valued Bayesian compressive sensing (C-BCS) method that has excellent performance in terms of recovery accuracy and operating speed. However, the C-BCS method is not stable for the CDB because the point spread function is a rank deficiency matrix. To overcome this problem, we propose the combination C-BCS method that combines the block-sparse and C-BCS methods to improve the performance of solving the CDB. The simulation results proved that the proposed method performed better than intensity-based deconvolution methods for the beamforming results generated by the coherent targets. A beamforming image of a pool scene captured by a narrowband forward-looking sonar system was adopted to test various deconvolution methods, and the proposed method exhibited superiority in sidelobe suppression.
30 May 2019 in IEEE Journal of Oceanic Engineering
Conventional beamforming is widely used in sonars and radars owing to its robustness and low complexity; however, it suffers from low beam resolution and high-intensity sidelobes. Various imaging deblurring methods have been used in deconvolution beamforming to improve the beam resolution. A considerable limitation of these intensity-based methods is that the real-valued model mismatches the signals in practice and ignores the coherent information of the received signals. This study proposes a probability-based complex-valued fast iterative shrinkage-thresholding algorithm (CFISTA) to extend deconvolution beamforming to the complex domain. In this novel algorithm, the complex gradient descent and complex probability mapping are combined. Fast Fourier transform acceleration and clustering prior constraints are used on the targets to improve the efficiency and accuracy of the model. Simulation results of planar arrays show that the proposed method has superior beam resolution, sidelobe suppression, running time, and noise immunity compared with those of intensity-based methods.
7 July 2022 in IEEE Journal of Oceanic Engineering
Large uniform rectangular arrays (URAs) are widely used in 3-D underwater imaging systems to obtain high-quality images; however, the gain and phase errors of these arrays can distort the results. To restore the image quality, many calibration methods have been proposed, most of which adopt a far-field model. This model requires the calibrator source to be far away, which reduces the signal-to-noise ratio and adversely affects the calibration accuracy. An effective means of alleviating this contradiction is to adopt the near-field signal model. However, the source location estimation in the near-field model typically uses spectral peak searches, which is a significant computational burden, particularly for large URAs. A fast and efficient near-field model self-calibration method for large URAs is proposed to obtain improved calibration results. First, a convenient preprocessing and two extended three-step iterative algorithms are used instead of spectral peak searches to estimate the source location efficiently. The array is then calibrated using a spatial matched filter and maximum a posteriori approach. Numerical results proved that the proposed method almost reaches the Cramér–Rao bound. Compared with existing near-field model calibration methods using spectral peak searches, the computational complexity of the proposed method is reduced by more than three orders of magnitude when the array size reaches 60 $\times $ 60 or more. By virtue of the near-field model, the phase calibration accuracy for large URAs at a close range is more than 10 times that of far-field model calibration methods.
Three-dimensional (3-D) imaging sonar systems require large planar arrays, which incur hardware costs. In contrast, a cross array consisting of two perpendicular linear arrays can also support 3-D imaging while dramatically reducing the number of sensors. Moreover, the use of an aperiodic sparse array can further reduce the number of sensors efficiently. In this paper, an optimized method for sparse cross array synthesis is proposed. First, the beamforming of a cross array based on a multi-frequency algorithm is simplified for both near-field and far-field. Next, a perturbed convex optimization algorithm is proposed for sparse cross array synthesis. The method based on convex optimization utilizes a first-order Taylor expansion to create position perturbations that can optimize the beam pattern and minimize the number of active sensors. Finally, a cross array with 100 + 100 sensors is employed from which a sparse cross array with 45 + 45 sensors is obtained via the proposed method. The experimental results show that the proposed method is more effective than existing methods for obtaining optimum results for sparse cross array synthesis in both the near-field and far-field.
A calibration method based on convex optimization (CVX) and neural networks is proposed for the large planar arrays of phased array three-dimensional imaging sonar systems. The method only needs an acoustic calibration source at an unknown position in the far field, and the direction of arrival (DOA) and gain and phase error are jointly estimated. The method uses a CVX algorithm to solve an optimization problem and initially estimates the DOA of the calibration source robustly. Subsequently, according to the estimation results, a neural network is used for fitting to obtain off-grid DOA estimation of the calibration source. Thereafter, spatial matched filtering is performed to obtain the gain and phase residual estimations. The root mean square error (RMSE) of the beam pattern calibrated by the method for uniform planar arrays can reach a value of 4.9542 × 10−5. The experimental results demonstrate the efficiency of the proposed method for gain and phase calibration.