Biomass is an important indicator for evaluating crops. The rapid, accurate and nondestructive monitoring of biomass is the key to smart agriculture and precision agriculture. Traditional detection methods are based on destructive measurements. Although satellite remote sensing, manned airborne equipment, and vehicle-mounted equipment can nondestructively collect measurements, they are limited by low accuracy, poor flexibility, and high cost. As nondestructive remote sensing equipment with high precision, high flexibility, and low-cost, unmanned aerial systems (UAS) have been widely used to monitor crop biomass. In this review, UAS platforms and sensors, biomass indices, and data analysis methods are presented. The improvements of UAS in monitoring crop biomass in recent years are introduced, and multisensor fusion, multi-index fusion, the consideration of features not directly related to monitoring biomass, the adoption of advanced algorithms and the use of low-cost sensors are reviewed to highlight the potential for monitoring crop biomass with UAS. Considering the progress made to solve this type of problem, we also suggest some directions for future research. Furthermore, it is expected that the challenge of UAS promotion will be overcome in the future, which is conducive to the realization of smart agriculture and precision agriculture.

To improve the precision of intelligent sugarcane harvesting, and to meet the requirements of high precision and low complexity for use with embedded devices, a lightweight model called MobileNet v2-YOLO v5s for the real-time detection of sugarcane stem nodes in complex natural environments was developed. In this study, images of sugarcane stem nodes in a complex natural environment were collected and a dataset containing 12,600 images was constructed using a data extension process. The MobileNet network was introduced to replace the backbone of the YOLO v5s algorithm and the improved algorithm was used to train the MobileNet-YOLO v5s sugarcane stem node identification model. In experiments aiming to verify the advantages of the lightweight model, MobileNet v2-YOLO v5s achieved the best combination of high precision and low complexity. Its AP was decreased by only 0.8%, while its complexity was reduced by 40% compared to YOLO v5s. It also had a fast detection speed of 4.4 ms on a Dell workstation P7920. Therefore, 11 other models were selected for comparative experiments to demonstrate the superiority of MobileNet v2-YOLO v5s. Finally, TensorRT accelerated optimization tests, execution tests, and real-time detection tests were performed on Jetson Nano. The results showed that the optimised MobileNet v2-YOLO v5s outperformed YOLO v5s in terms of identification, lightweight and detection speed on embedded devices. Overall, MobileNet v2-YOLO v5s model meets the requirements of embedded devices and can provide a visual identification method for intelligent sugarcane harvesting.

The rapid and accurate identification of sugarcane stem nodes in the complex natural environment is essential for the development of intelligent sugarcane harvesters. However, traditional sugarcane stem node recognition has been mainly based on image processing and recognition technology, where the recognition accuracy is low in a complex natural environment. In this paper, an object detection algorithm based on deep learning was proposed for sugarcane stem node recognition in a complex natural environment, and the robustness and generalisation ability of the algorithm were improved by the dataset expansion method to simulate different illumination conditions. The impact of the data expansion and lighting condition in different time periods on the results of sugarcane stem nodes detection was discussed, and the superiority of YOLO v4, which performed best in the experiment, was verified by comparing it with four different deep learning algorithms, namely Faster R-CNN, SSD300, RetinaNet and YOLO v3. The comparison results showed that the AP (average precision) of the sugarcane stem nodes detected by YOLO v4 was 95.17%, which was higher than that of the other four algorithms (78.87%, 88.98%, 90.88% and 92.69%, respectively). Meanwhile, the detection speed of the YOLO v4 method was 69 f/s and exceeded the requirement of a real-time detection speed of 30 f/s. The research shows that it is a feasible method for real-time detection of sugarcane stem nodes in a complex natural environment. This research provides visual technical support for the development of intelligent sugarcane harvesters.

Spatial location of sugarcane nodes using robots in agricultural conditions is a challenge in modern precision agriculture owing to the complex form of the sugarcane node when wrapped with leaves and the high computational demand. To solve these problems, a new binocular location method based on the improved YOLOv4 was proposed in this paper. First, the YOLOv4 deep learning algorithm was improved by the Channel Pruning Technology in network slimming, so as to ensure the high recognition accuracy of the deep learning algorithm and to facilitate transplantation to embedded chips. Secondly, the SIFT feature points were optimised by the RANSAC algorithm and epipolar constraint, which greatly reduced the mismatching problem caused by the similarity between stem nodes and sugarcane leaves. Finally, by using the optimised matching point to solve the homography transformation matrix, the space location of the sugarcane nodes was for the first time applied to the embedded chip in the complex field environment. The experimental results showed that the improved YOLOv4 algorithm reduced the model size, parameters and FLOPs by about 89.1%, while the average precision (AP) of stem node identification only dropped by 0.1% (from 94.5% to 94.4%). Compared with other deep learning algorithms, the improved YOLOv4 algorithm also has great advantages. Specifically, the improved algorithm was 1.3% and 0.3% higher than SSD and YOLOv3 in average precision (AP). In terms of parameters, FLOPs and model size, the improved YOLOv4 algorithm was only about 1/3 of SSD and 1/10 of YOLOv3. At the same time, the average locational error of the stem node in the Z direction was only 1.88 mm, which totally meets the demand of sugarcane harvesting robots in the next stage.

Mikania micrantha Kunth is an invasive alien weed and known as a plant killer around the world. Accurately and rapidly identifying M. micrantha in the wild is important for monitoring its growth status, as this helps management officials to take the necessary steps to devise a comprehensive strategy to control the invasive weed in the identified area. However, this approach still mainly depends on satellite remote sensing and manual inspection. The cost is high and the accuracy rate and efficiency are low. We acquired color images of the monitoring area in the wild environment using an Unmanned Aerial Vehicle (UAV) and proposed a novel network —MmNet— based on a deep Convolutional Neural Network (CNN) to identify M. micrantha in the images. The network consists of AlexNet Local Response Normalization (LRN), along with the GoogLeNet and continuous convolution of VGG inception models. After training and testing, the identification of 400 testing samples by MmNet is very good, with accuracy of 94.50% and time cost of 10.369 s. Moreover, in quantitative comparative analysis, the proposed MmNet not only has high accuracy and efficiency but also simple construction and outstanding repeatability. Compared with recently popular CNNs, MmNet is more suitable for the identification of M. micrantha in the wild. However, to meet the challenge of wild environments, more M. micrantha images need to be acquired for MmNet training. In addition, the classification labels need to be sorted in more detail. Altogether, this research provides some theoretical and scientific basis for the development of intelligent monitoring and early warning systems for M. micrantha and other invasive species.