Till M. Biedermann

Dr. Till M. Biedermann

Instuitute of Sound and Vibration Engineering ISAVE, University of Applied Sciences Dusseldorf
orcid

Research Focus & Metrics

Academic Career Length

10Years (2017-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 September 2017 in AIAA Journal
Verified
Journal Article
Closed access
TBTill M. Biedermann
Till M. Biedermann
TCTze Pei Chong
Tze Pei Chong
FKFrank Kameier
Frank Kameier
CPChristian Oliver Paschereit
Christian Oliver Paschereit
With the objective of reducing the broadband noise from the interaction of highly turbulent flow and airfoil leading edge, sinusoidal leading-edge serrations were investigated as an effective passive treatment. An extensive aeroacoustic study was performed to determine the main influences and interdependencies of factors, such as the Reynolds number, turbulence intensity, serration amplitude, and wavelength as well as the angle of attack on the noise-reduction capability. A statistical–empirical model was developed to predict the overall sound pressure level and noise reduction of a NACA 65(12)-10 airfoil with and without leading-edge serrations in the range of chord-based Reynolds numbers of 2.5×105≤Re≤6×105. The observed main influencing factors on the noise radiation were quantified in a systematic order for the first time. Moreover, significant interdependencies of the turbulence intensity and the serration wavelength, as well as the serration wavelength and the angle of attack, were observed, validated, and quantified. The statistical–empirical model was validated against an external set of experimental data, which is shown to be accurate and reliable.

1 September 2019 in AIAA Journal
Verified
Journal Article
Closed access
TBTill M. Biedermann
Till M. Biedermann
PCPasquale Czeckay
Pasquale Czeckay
TGThomas F. Geyer
Thomas F. Geyer
FKFrank Kameier
Frank Kameier
CPChristian O. Paschereit
Christian O. Paschereit

23 July 2020 in Acoustics
Verified
Journal Article
Open access
PDF file
TBTill M. Biedermann
Till M. Biedermann
PCPasquale Czeckay
Pasquale Czeckay
NHNils Hintzen
Nils Hintzen
FKFrank Kameier
Frank Kameier
CPChristian Oliver Paschereit
Christian Oliver Paschereit
The dominant aeroacoustic mechanisms of serrated leading edges, subjected to highly turbulent inflow conditions, can be compressed to spanwise decorrelation effects as well as effects of destructive interference. For single aerofoils, the resulting broadband noise reduction is known to follow spectral scaling laws. However, transferring serrated leading edges to rotating machinery, results in noise radiation patterns of significantly increased complexity, impeding to allocate the observed noise reduction to the underlying physical mechanisms. The current study aims at concatenating the scaling laws for stationary aerofoil and rotating-blade application and thus at providing valuable information on the aeroacoustic transferability of leading edge serrations. For the pursued approach, low-pressure axial fans are designed, obtaining identical serrated fan blade geometries than previously analyzed single aerofoils, hence allowing for direct comparison. Highly similar spectral noise reduction patterns are obtained for the broadband noise reduction of the serrated rotors, generally confirming the transferability and showing a scaling with the geometrical parameters of the serrations as well as the inflow conditions. Continuative analysis of the total noise reduction, however, constrains the applicability of the scaling laws to a specific operating range of the rotors and motivates for a devaluation of the scaling coefficients regarding additional rotor-specific effects.

16 September 2019 in Journal of Engineering for Gas Turbines and Power
Verified
Journal Article
Closed access
TBTill M. Biedermann
Till M. Biedermann
FKF. Kameier
F. Kameier
CPC. O. Paschereit
C. O. Paschereit
Leading edge serrations are identified as an effective passive treatment for reducing fan broadband noise due to high turbulent inflow conditions. This paper aims to investigate the isolated effect of serrated applications in a rotating frame, covering the aerodynamic and aeroacoustic performance. With this purpose, a serration design, previously analyzed in the rigid domain, is transferred to the rotating frame, following a successive approach in form of a continuous increase of the fan blade number. This is considered as a feasible way to isolate the serration effects and to provide information on fan blade interaction and possible masking effects. Comparing blades with straight and serrated leading edges by analyzing the spectral noise reduction and the overall level result in deep insights in the underlying noise reduction mechanisms. Furthermore, analysis of phase differences by means of the wall pressure fluctuations leads to the identification of rotating flow phenomena, nonsynchronized with the rotor speed. The results obtained indicate an efficient noise reduction by the serrations in the vicinity of the design point. By use of the presented successive approach, noise reduction phenomena observed with the full rotor could be identified to be of either aeroacoustic or aerodynamic nature. A reduced noise is observed for the full rotor case, showing a reduction of blade interaction effects. At reducing flow coefficients, an improved stall margin of the serrated rotor is identified that also affects the aeroacoustic signature.

1 September 2021 in Journal of Aerospace Engineering
Verified
Journal Article
Closed access
PDF file
LAL. Al-Sadawi
L. Al-Sadawi
TBTill M. Biedermann
Till M. Biedermann
MFM. Fritsche
M. Fritsche
Passive air-jet blowing is an effective yet simple technique to control flow-induced noise due to vortex shedding of bluff bodies. The current study investigates the effect of the specific slot angles of passive jets in connection with the suppression capabilities of vortex shedding and the byproduct of vortex-induced noise in the wake region of a circular cylinder. Aeroacoustic tests for a baseline case and 10 different slotted cases with slot angles of 80°≤θ≤125° are performed for Reynolds numbers 6.6×103≤R≤3.3×104 . This is supplemented by numerical computational fluid dynamics (CFD) analyses to identify the underlying aerodynamic mechanisms. The results obtained reveal that using the current passive control method results in a significant reduction of the vortex shedding tonal noise for slot angles of 90°≤θ≤125° and high Reynolds numbers. The numerical results showed good agreement with a remarkably reduced kinetic energy for slot-end angles of 115°≤θ≤125° . At low Reynolds numbers, however, the identified aeroacoustic benefits tend to cease.

17 June 2019
Verified
Conference Paper
Closed access
PDF file
TBTill M. Biedermann
Till M. Biedermann
FKF. Kameier
F. Kameier
CPC. O. Paschereit
C. O. Paschereit
Leading edge serrations are identified as an effective passive treatment for reducing fan broadband noise due to high turbulent inflow conditions. This paper aim to investigate the isolated effect of serrated applications in a rotating frame, covering the aerodynamic and aeroacoustic performance. With this purpose, a serration design, previously analyzed in the rigid domain, is transferred to the rotating frame, following a successive approach in form of a continuous increase of the fan blade number. This is considered as a feasible way to isolate the serration effects and to provide information on fan blade interaction and possible masking effects. Comparing blades with straight and serrated leading edges by analyzing the spectral noise reduction and the overall level results in deep insights in the underlying noise reduction mechanisms. Furthermore, analysis of phase differences by means of the wall pressure fluctuations leads to the identification of rotating flow phenomena, non-synchronized with the rotor speed. The results obtained indicate an efficient noise reduction by the serrations in the vicinity of the design point. By use of the presented successive approach, noise reduction phenomena observed with the full rotor could be identified to be of either aeroacoustic or aerodynamic nature. A reduced noise is observed for the full rotor case, showing a reduction of blade interaction effects. At reducing flow coefficients, an improved stall margin of the serrated rotor is identified that also affects the aeroacoustic signature.