School of Architecture, Harbin Institute of Technology, Key Laboratory of Cold Region Urban and Rural Human Settlement Environment Science and Technology, Ministry of Industry and Information Technology, Harbin 150090, China
Dr. Zhao Shen
School of Architecture, Harbin Institute of Technology, Key Laboratory of Cold Region Urban and Rural Human Settlement Environment Science and Technology, Ministry of Industry and Information Technology, Harbin 150090, China
In the past decade, the application of photocatalytic sterilization technology for indoor air disinfection has been extensively investigated. However, selecting suitable photocatalysts with high sterilization efficiency remains a challenge. By doping and incorporating metals, the bandgap can be narrowed, thereby avoiding the recombination of photogenerated charges. This study compares the photocatalytic sterilization performances of three commonly used photocatalysts (TiO 2 –Ag, MnO 2 –TiO 2 , and MnO 2 –CeO 2 ) in a controlled laboratory setting. The results demonstrated that TiO 2 –Ag exhibited the best sterilization performance. Within 20 min, the concentration of Serratia marcescens (the test bacterium) decreased logarithmically with respect to ln3.78 under a light intensity of 640 W/m 2 . During the bacterial inactivation process, Serratia marcescens is inactivated by the destruction of its cell membrane, which decreases its enzyme activity and releases its cell contents. This can be attributed to the efficient generation of reactive oxygen species (O 2 • – and •OH) and the thermal effect. Spectral regulation has the most significant impact on the sterilization efficiency of MnO 2 –TiO 2 , reducing the probability of photocatalytic materials being excited. A significance analysis indicated that light intensity, exposure duration, photocatalyst type, dilution of used photocatalysts, and spectral regulation substantially impact photocatalytic sterilization outcomes. Density functional theory (DFT) was used to elucidate the mechanism for the adsorption and catalysis of bacterial cell membranes at the atomic scale.
1 March 2021 in Journal of Renewable and Sustainable Energy
The photovoltaic/thermal (PVT) collector is an eco-friendly technology that simultaneously converts solar energy into electrical and thermal energy. However, a high solar cell temperature seriously affects the electrical efficiency of the PVT collector, which is an urgent problem that needs to be addressed. Some traditional cooling technologies for PVT collectors were previously investigated, but they were inefficient in heat collecting performance. In addition, a nonuniform solar cell temperature distribution accelerates the aging of PVT modules, and this topic has only rarely been discussed. In the present study, a new leaf-like heat exchanger based on bionics was proposed to improve heat control of the PVT collector. A three-dimensional mathematical model was developed in COMSOL and validated by comparing modeling results with experimental data already available in the literature. The effect of different operating conditions on the performance of the new PVT collector was investigated. The results of this study show that the bifurcation angle of the leaf-like heat exchanger with a symmetrical configuration between 20° and 35° was characterized by a lower and more uniform temperature distribution on solar cells in comparison with conventional heat exchangers. Moreover, the average temperature of the solar cell cooled by the new leaf-like heat exchanger decreased by 5.31 °C, and the pressure drop associated with the leaf-like heat exchanger was only half the value of the pressure drop associated with a conventional heat exchanger at a mass flow rate of 0.0314 kg/s. Finally, the total efficiency of the new PVT collector was 4.36% higher than that of the conventional PVT collector.
Smart windows effectively respond to the ever‐changing climatic conditions, offering a smart solution for low‐carbon buildings. However, current smart windows derived from chromic materials often have inferior solar modulation ability, or showcase high haze that obstructs outdoor views. Here, instead of developing new chromic materials, a new bistatic window is proposed for ultra‐high solar modulation and luminous transmission. The new developed window can reduce the indoor surface temperature for ≈11 °C, and reduce the building space cooling and heating energy consumption by 30% to 40%, providing significant energy‐related advances over traditional smart windows. In detail, the bistatic window exhibits excellent solar modulation ability (ΔTsol = 61%), high visible transmittance in both bleached (Tlum,bleached = 91%) and colored (Tlum,colored = 56%) states, low haze (< 1%), rapid switching response (switching time < 1 min), high color rendering index (CRI > 80), and long‐cyclic stability after 1000 cycles. With the advantages of facile fabrication and scalability, it is foreseen the developed bistatic window holds promising prospect for the next‐generation low‐carbon buildings, paving a new way for future advancements in the fields of smart windows.
19 February 2026 in Renewable and Sustainable Energy Reviews