The stability of the phase difference between two white-light continua, generated from the same 180-fs pulses at 1035 nm, is assessed by a modified Bellini-Hänsch interferometer. Mutual spectral phase stability is studied and quantified as a function of several parameters: pulse energy, position of the nonlinear crystal with respect to the beam waist and interaction length. Our results show that intrapulse decoherence may significantly contribute to the measured CEP noise floor. In addition, spectrally-resolved intensity-to-phase coupling coefficients are measured and stability regions are identified.
Spatial Light Modulators (SLMs) are quasiplanar devices, allowing for the modulation of the amplitude, phase and polarization, or a combination of these parameters of an incident light beam according to the two spatial dimensions of the modulator. SLMs are employed in many different fields and are the subject of continuous technological development.
The laser-induced damage threshold (LIDT) of nematic liquid crystals is investigated in the femtosecond regime at . The thickness and breakdown of freely suspended thin films ( ) of different mixtures (MLC2073, MLC2132, and E7) is monitored in real time by spectral-domain interferometry. The duration of laser pulses was varied from 180 fs to 1.8 ps for repetition rates ranging from single shot to 1 MHz. The dependence of the LIDT with pulse duration suggests a damage mechanism dominated by ionization mechanisms at low repetition rate and by linear absorption at high repetition rate. In the single-shot regime, LIDTs exceeding are found for the three investigated mixtures. The LIDT of polyvinyl alcohol is also investigated by the same method.
17 June 2020 in Journal of The Royal Society Interface
Biological systems inspire the design of multifunctional materials and devices. However, current synthetic replicas rarely capture the range of structural complexity observed in natural materials. Prior to the definition of a biomimetic design, a dual investigation with a common set of criteria for comparing the biological material and the replica is required. Here, we deal with this issue by addressing the non-trivial case of insect cuticles tessellated with polygonal microcells with iridescent colours due to the twisted cholesteric organization of chitin fibres. By using hyperspectral imaging within a common methodology, we compare, at several length scales, the textural, structural and spectral properties of the microcells found in the two-band cuticle of the scarab beetleChrysina gloriosawith those of the polygonal texture formed in flat films of cholesteric liquid crystal oligomers. The hyperspectral imaging technique offers a unique opportunity to reveal the common features and differences in the spectral-spatial signatures of biological and synthetic samples at a 6-nm spectral resolution over 400 nm–1000 nm and a spatial resolution of 150 nm. The biomimetic design of chiral tessellations is relevant to the field of non-specular properties such as deflection and lensing in geometric phase planar optics.