Wei Li

Ms. Wei Li

orcid

Research Focus & Metrics

Academic Career Length

7Years (2020-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
24 September 2020 in Materials
Verified
Journal Article
Open access
PDF file
WLWei Li
Wei Li
Sen  Han Sen Han
Sen Han
QHQIBO HUANG
QIBO HUANG
In this paper, the ultra-thin layer (UTL) is defined as the dense framework structure mixture made of asphalt binder, fine aggregate with nominal maximum aggregate size (NMAS) not greater than 13.2 mm and possible additives (mineral or organic), thickness of 2–4 cm. The study aims to investigate comprehensive performance of UTL asphalt mixture. The method of impact freeze thaw split test and the index of impact freeze–thawing damage degree (IFTDD) are proposed to reflect the durability. The indoor tire-rolling-down test system and accelerated abrasion machine are used to simulate the tire-pavement interaction and test road noise and skid resistance, respectively. Though evaluating the influencing factors (pavement thickness, gradation, asphalt binder type, and the content of KS additive) on durability, the optimum parameters with excellent durability are recommended. Combined with the test of noise and skid resistance, the factors affecting the surface function are analyzed. Moreover, the prediction mathematical model of skid resistance and the long-term safety benefit value Eeff are put forward. Results indicate that pavement thickness is the most significant factor effecting on durability, and gradation is the most significant factor affecting noise. Compared with KS additive, gradation has a greater influence on skid resistance index of Texture Depth (TD), whereas, KS additive is the most significant factor affecting British Pendulum Number (BPN). Furthermore, with the addition of asphalt rubber (AR), IFTDD and noise are reduced by 29.17% and 1.6 dB, and BPN and TD increase by 0.7 and 0.03 mm, remarkably. Compared with different asphalt types, the noise of UTL asphalt rubber mixture with 13.2 mm NMAS (UTL13 AR) is the lowest. Additionally, when KS content increases by 0.6%, the noise increases by 3 dB. Furthermore, on the basis of the calculation results of Eeff, UTL13 AR mixture with 0.5% KS has the best long-term benefit of pavement safety and is recommended for field project.

28 February 2021 in Materials
Verified
Journal Article
Open access
PDF file
WLWei Li
Wei Li
Sen  Han Sen Han
Sen Han
XFXiaokang Fu
Xiaokang Fu
KHKe Huang
Ke Huang
The aims of this paper are to prepare disintegrated high volume crumb rubber asphalt (DHVRA) with low viscosity, good workability and low-temperature performance by adding disintegrating agent (DA) in the preparation process, and to further analyze the disintegrating mechanism and evaluated high-temperature and low-temperature rheological properties. To obtain DHVRA with excellent comprehensive performance, the optimum DA dosage was determined. Based on long-term disintegrating tests and the Fluorescence Microscopy (FM) method, the correlations between key indexes and crumb rubber (CR) particle diameter was analyzed, and the evaluation indicator and disintegrating stage division standard were put forward. Furthermore, Fourier transform infrared spectroscopy (FT-IR) and Gel Permeation Chromatography (GPC) was used to reveal the reaction mechanism, and the contact angle test method was adopted to evaluate the surface free energy (SFE). In addition, the high-temperature and low-temperature rheological properties were measured, and the optimum CR content was proposed. Results indicated that the optimum DA dosage was 7.5‰, and the addition of DA promoted the melt decomposition of CR, reduced the viscosity and improved the storage stability. The 135 °C rotational viscosity (RV) of DHVRA from mixing for 3 h could be reduced to 1.475 Pa·s, and the softening point difference was even less than 2 °C. The linear correlation between 135 °C RV and the diameter of CR particle in rubber asphalt system was as high as 0.968, and the viscosity decay rate (VDR) was used as the standard to divide the disintegrating process into a fast disintegrating stage, stable disintegrating stage and slight disintegrating stage. Compared to common rubber asphalt (CRA), DHVRA has an absorption peak at 960 cm−1 caused by trans olefin = C-H, and higher molecular weight and polar component of surface energy. Compared with CRA, although the high-temperature performance of DHVRA decreases slightly, the low-temperature relaxation ability can be greatly improved.