A novel reactive phosphorus and sulfur-containing monomer (bis(acryloxyethyldiphenylphosphate)sulfone, BADPS) was synthesized to enhance the comprehensive performance of unsaturated polyester resin (UPR), and corresponding flame-retardant unsaturated polyester resins (FR-UPRs) with various amounts of BADPS were prepared by radical bulk polymerization. The flame retardancy and thermal and mechanical properties of the UPR samples were investigated by limiting oxygen index (LOI) measurements, cone calorimetry, differential scanning calorimetry (DSC), a thermogravimetric analysis (TGA), and a tension test. The results showed that the introduction of BADPS remarkably enhanced the flame resistance and high-temperature stability, as well as the tensile performance of UPR. Scanning electron microscopy (SEM), Fourier transform infrared (FTIR), and Raman spectroscopy studies revealed that BADPS can efficaciously promote the formation of UPR char residue with an improved microstructure and increased graphitization degree, which enhancedthe high-temperature stability and char yield of UPR. Additionally, a thermogravimetry-Fourier transform infrared (TG-FTIR) analysis corroborated that the evolution of combustible volatiles from UPR decomposition was substantially restrained by the incorporation of BADPS, which is beneficial for the suppression of fire hazards in UPR.
To enhance the fire safety performance in polystyrene (PS), a novel organic–inorganic hybrid material (FGO–AHP) was successfully prepared by the combination of functionalized graphene oxide (FGO) and aluminum hypophosphite (AHP) via a chemical deposition method. The resulting FGO–AHP nanohybrids were incorporated into PS via a masterbatch-melt blending to produce PS/FGO–AHP nanocomposites. Scanning electron microscope images confirm the homogeneous dispersion and exfoliation state of FGO–AHP in the PS matrix. Incorporating FGO–AHP significantly improves the thermal behavior and fire safety performance of PS. By incorporating 5 wt% FGO–AHP, the maximum mass loss rate (MMLR) in air, total heat release (THR), and maximum smoke density value (Dsmax) of PS nanocomposite achieve a reduction of 53.1%, 23.4%, and 50.9%, respectively, as compared to the pure PS. In addition, thermogravimetry–Fourier transform infrared (TG–FTIR) results indicate that introducing FGO–AHP notably inhibits the evolution of volatile products from PS decomposition. Further, scanning electron microscopy (SEM), FTIR, and Raman spectroscopy were employed to investigate the char residue of PS nanocomposite samples, elaborating the flame-retardant mechanism in PS/FGO–AHP nanocomposites.