Polymer flooding is an enhanced oil recovery (EOR) method used to increase oil recovery from oil reservoirs beyond primary and secondary recovery. Although it is one of the most well-established methods of EOR, there are still continuous new developments and evaluations for this method. This is mainly attributed to the diverse polymers used, expansion of this method in terms of application, and the increase in knowledge pertaining to the topic due to the increase in laboratory testing and field applications. In this research, we perform a review of the factors impacting polymer flooding in both laboratory studies and field-based applications in order to create guidelines with respect to the parameters that should be included when designing a polymer flooding study or application. The main mechanism of polymer flooding is initially discussed, along with the types of polymers that can be used in polymer flooding. We then discuss the most prominent parameters that should be included when designing a polymer flooding project and, based on previous laboratory studies and field projects, discuss how these parameters impact the polymer itself and the flooding process. This research can provide guidelines for researchers and engineers for future polymer flooding research or field applications.

Over time, the dependence on oil has increased to meet industrial and domestic needs. Enhanced oil recovery (EOR) techniques in this regard have captured immense growth as EOR is not only used to increase the oil recovery but also to augment the sweep efficiency. Several techniques over the past decades have been used to improve oil recovery with cost-effectiveness. Cost-effective alkaline flooding has been effective for those oil reservoirs with a high total acid number. In this review, the significance of alkaline flooding has been discussed in detail, as well as the features of alkaline flooding in comparison to other modes of flooding. This review entails (1) alkaline flooding, (2) hybrid modes of injection, (3) experimental work, (4) pilot projects, (5) screening criteria, and (6) field applications. The findings of this study can help increase the understanding of alkaline flooding and provide a holistic view of the hybrid modes of flooding.

The present work emphasizes on the changes in the Red Sea and Dead Sea mixed waters physical properties including: temperature, pH, dissolved oxygen, density, salinity and viscosity. It focuses on the impacts of changes in mixed water quality on the Dead Sea ecosystem and the current industrial activities. The pilot project site consisted of six water ponds (tanks) located next to Arab Potash Company point of intake about 100 m south of the Dead Sea shores. The Red Sea - Dead Sea water mixing was controlled and done based on the expected mixing ratios between Red Sea and Dead Sea waters to mimic the potential actual situation associated with Red Sea – Dead Sea project conduit.

Polymers are one of the most widely used chemicals in the oil and gas industry. They are used for mobility control in enhanced oil recovery, in conformance control as a cross-linked plugging agent, as a fracking fluid for fracture propagation and proppant transportation, and in drilling fluids as an additive for drilling mud enhancement. This research characterizes the polymer injectivity in different pore sizes under different conditions and evaluates the polymer conditions after injection. Based on this, the ability to reinject the polymer in the porous media is discussed. The factors studied include the pore size, the polymer concentration, the polymer injection flowrate, and polymer injectivity. When the porous media size was reduced to 1.59 mm (1/16th of an inch), the injectivity value reduced significantly, reaching less than 0.2 mL/min/psi and the polymer degradation increased primarily due to shearing. Results also showed that the polymers underwent four main degradations during injection including dehydration, syneresis, shearing, and excessive hydrolysis. In continuous fractures, the degradation is a strong function of the fracture size, length, and the polymer structure. The experimental results showed that one or more of the polymer degradations resulted in the inability to reinject the polymer in most cases.