In this paper, aiming at focusses on many problems existing in the mathematical model of temperature change in the low-pressure casting solidification process of aluminum alloy wheel hub, there is a big gap between the simulation and the actual temperature change, which affects the research on the solidification defects of the wheel hub. In order to study the solidification behavior of aluminum alloy hub in low-pressure casting process, the mathematical model describing the temperature change in the process of casting solidification is established by using different solidification latent heat methods. through finite element simulation and experiment, the temperature change in the process of aluminum alloy (A356) solidification is obtained to compare the difference between the temperature change described by different mathematical models, simulation and experiment. The results show that the temperature numerical model of "the temperature compensation heat capacity method" proposed in this paper is most consistent with the simulation temperature change during the solidification process of the aluminum alloy wheel in the simulation mold, which lays a good theoretical foundation for the study of the low-pressure casting process of the aluminum alloy wheel hub.
1 January 2012 in Mathematical Problems in Engineering
Sensitivity analysis plays a key role in structural optimization, but traditional methods of sensitivity analysis in strength and stiffness are time consuming and of high cost. In order to effectively carry out structural optimization of hydraulic press, this paper presents a novel sensitivity analysis method in structural performance of hydraulic press, which saves a great deal of time and design costs. The key dimension parameters of the optimization of design variables, which remarkably impact on the structural performance of hydraulic press, are efficiently selected. The impact order of various sensitivity parameters in strength and stiffness of machine tools is consistent with the sensitivity ranking of regression analysis. The research results provide the basis for the hydraulic machine design and references in research of machine tools and equipment.
Aiming at the problems of traditional grasping methods for mobile manipulators, such as single application scenarios, low accuracy, and complex grasping tasks, this paper proposes an object recognition grasping approach using Proximal Policy Optimization (PPO) with You Only Look Once v5 (YOLOv5), which combines a vision recognition algorithm with a deep reinforcement learning algorithm to achieve object recognition grasping. First, YOLOv5 is adopted to identify the object and obtain the location information. Second, the PPO algorithm is used for object grasping to obtain the grasping strategy. Third, the PPO algorithm is compared with the Soft Actor-Critic (SAC) and Trust Region Policy Optimization (TRPO) algorithms in batches 16 and 128, respectively. The average reward training results of the PPO, SAC, and TRPO algorithms are obtained in our work. Experimental results show that the proposed method, in terms of object recognition speed, outperforms the original YOLOv4 model. The YOLOv5 model achieves 96% precision on our own built recognition dataset, which has higher detection precision and lower hardware requirements than the YOLOv4 model. Our proposed method outperforms SAC and TRPO algorithms in object grasping, and the average reward of the PPO algorithm is improved by 93.3% and 41% compared to SAC and TRPO algorithms, respectively. Finally, through the comparison of ablation experiments, our method has the highest accuracy and mean average precision (mAP)@0.5 value of 92.3%. We demonstrate in actual physical experiments that the grasping success rate under our proposed approach reaches 100%, providing a new research strategy for object grasping by the robot manipulator.
The fatigue life prediction model of self-piecing riveting components of aluminum alloy is established and the effects of roughness and residual stress on fatigue life of self-piercing riveting components is analyzed by the model. Finite element software ABAQUS and fatigue analysis software FE-SAFE are used to study the effects of roughness and residual stress on the fatigue life of self-piecing riveting components through finite element simulation and mathematical statistics multivariate orthogonal regression experiment. The quantitative relations between fatigue life and three variables (roughness, residual stress and maximum stress) are fitted, and the variation trend of fatigue life with roughness and residual stress is obtained. The order of influence of roughness, residual stress, maximum stress and two interactions on fatigue life is as follows: residual stress, interaction between roughness and residual stress, roughness. When the maximum stress is fixed, the fatigue life decreases with the increase of roughness with a certain residual stress, and the fatigue life decreases with the increase of roughness with a certain residual stress. The average error between the fatigue experiment results and the simulation results is 9.74%, which proves that the simulation results are reliable.
Flexible manipulators have been widely used in industrial production. However, due to the poor rigidity of the flexible manipulator, it is easy to generate vibration. This will reduce the working accuracy and service life of the flexible manipulator. It is necessary to suppress vibration during the operation of the flexible manipulator. Based on the energy method and the Hamilton principle, the partial differential equations of the manipulator were established. Secondly, an improved radial basis function (RBF) neural network was combined with the fuzzy backstepping method to identify and suppress random vibration during the operation of the flexible manipulator, and the Lyapunov function and control law were designed. Finally, Simulink was used to build a simulation platform, three different external disturbances were set up, and the effect of vibration suppression was observed through the change curves of the final velocity error and displacement error. Compared with the RBF neural network boundary control method and the RBF neural network inversion method, the simulation results show that the effect of the RBF neural network fuzzy inversion method is better than the previous two control methods, the system convergence is faster, and the equilibrium position error is smaller.
22 April 2014 in Science China Technological Sciences