Emad Scharifi

Mr. Emad Scharifi

orcid

Research Focus & Metrics

Academic Career Length

11Years (2016-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
29 June 2023 in Advanced Engineering Materials
Verified
Journal Article
Open access
ESEmad Scharifi
Emad Scharifi
VYVictoria A. Yardley
Victoria A. Yardley
UWUrsula Weidig
Ursula Weidig
DSDamian Szegda
Damian Szegda
JLJianguo Lin
Jianguo Lin
KSKurt Steinhoff
Kurt Steinhoff
In the past decade, aluminum alloys have become important structural materials in the automotive industry, thanks to their low density, high strength, high fracture toughness, and good fatigue performance. However, an important limitation of aluminum alloys is their poor formability at room temperature; as a result, numerous studies have been conducted with the aim of developing forming techniques to overcome this and facilitate the forming of more complex‐shaped components. Following an overview on the metallurgical background of aluminum alloys, this article reviews recent developments in forming processes for aluminum alloys. The focus is on process variants at room temperature and at higher temperatures and on a new hot forming technique promising considerable improvements in formability. This review summarizes the influence of different process parameters on microstructures and mechanical properties. Particular emphasis is given to process design and to the underlying microstructural phenomena governing the strengthening mechanisms.

3 July 2020 in Metals
Verified
Journal Article
Open access
PDF file
SSSeyedvahid Sajjadifar
Seyedvahid Sajjadifar
ESEmad Scharifi
Emad Scharifi
UWUrsula Weidig
Ursula Weidig
KSKurt Steinhoff
Kurt Steinhoff
Thomas NiendorfThomas Niendorf
Thomas Niendorf
This study focuses on the high temperature characteristics of thermo-mechanically processed AA7075 alloy. An integrated die forming process that combines solution heat treatment and hot forming at different temperatures was employed to process the AA7075 alloy. Low die temperature resulted in the fabrication of parts with higher strength, similar to that of T6 condition, while forming this alloy in the hot die led to the fabrication of more ductile parts. Isothermal uniaxial tensile tests in the temperature range of 200–400 °C and at strain rates ranging from 0.001–0.1 s−1 were performed on the as-received material, and on both the solution heat-treated and the thermo-mechanically processed parts to explore the impacts of deformation parameters on the mechanical behavior at elevated temperatures. Flow stress levels of AA7075 alloy in all processing states were shown to be strongly temperature- and strain-rate dependent. Results imply that thermo-mechanical parameters are very influential on the mechanical properties of the AA7075 alloy formed at elevated temperatures. Microstructural studies were conducted by utilizing optical microscopy and a scanning electron microscope to reveal the dominant softening mechanism and the level of grain growth at elevated temperatures.

8 August 2019 in Journal of Materials Engineering and Performance
Verified
Journal Article
Closed access
PDF file
SSSeyedvahid Sajjadifar
Seyedvahid Sajjadifar
GMG. Moeini
G. Moeini
ESEmad Scharifi
Emad Scharifi
CLC. Lauhoff
C. Lauhoff
SBStefan Böhm
Stefan Böhm
Thomas NiendorfThomas Niendorf
Thomas Niendorf

1 January 2019 in Procedia Manufacturing
Verified
Journal Article
Open access
ESEmad Scharifi
Emad Scharifi
RKRuben Knoth
Ruben Knoth
UWUrsula Weidig
Ursula Weidig

1 March 2022 in International Journal of Fatigue
Verified
Journal Article
Closed access
SSS.V. Sajadifar
S.V. Sajadifar
ESEmad Scharifi
Emad Scharifi
TWThomas Wegener
Thomas Wegener
MKM. Krochmal
M. Krochmal
SLS. Lotz
S. Lotz
Thomas NiendorfThomas Niendorf
Thomas Niendorf

9 September 2022 in Crystals
Verified
Journal Article
Open access
PDF file
JDJens Decke
Jens Decke
AEAnna Engelhardt
Anna Engelhardt
LRLukas Rauch
Lukas Rauch
SDSebastian Degener
Sebastian Degener
SSSeyedvahid Sajjadifar
Seyedvahid Sajjadifar
BSBernhard Sick
Bernhard Sick
The present work focuses on the prediction of the hot deformation behavior of thermo-mechanically processed precipitation hardenable aluminum alloy AA7075. The data considered focus on a novel hot forming process at different tool temperatures ranging from 24∘C to 350∘C to set different cooling rates after solution heat-treatment. Isothermal uniaxial tensile tests in the temperature range of 200∘C to 400∘C and at strain rates ranging from 0.001 s−1 to 0.1 s−1 were carried out on four different material conditions. The present paper mainly focuses on a comparative study of modeling techniques based on Machine Learning (ML) and the Zerilli–Armstrong model (Z–A) as reference. Related work focuses on predicting single data points of the curves that the model was trained on. Due to the way data were split with respect to training and testing data, it is possible to predict entire stress–strain curves. The model allows to decrease the number of required laboratory experiments, eventually saving costs and time in future experiments. While all investigated ML methods showed a higher performance than the Z–A model, the extreme Gradient Boosting model (XGB) showed superior results, i.e., the highest error reduction of 91% with respect to the Mean Squared Error.