Martín Alejandro Valencia Ponce

Martín Alejandro Valencia Ponce

orcid

Research Focus & Metrics

Academic Career Length

7Years (2020-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
17 December 2021 in Electronics
Verified
Journal Article
Open access
PDF file
MPMartín Alejandro Valencia Ponce
Martín Alejandro Valencia Ponce
Esteban Tlelo-CuautleEsteban Tlelo-Cuautle
Esteban Tlelo-Cuautle
LFLuis G. De La Fraga
Luis G. De La Fraga
In CMOS integrated circuit (IC) design, operational amplifiers are one of the most useful active devices to enhance applications in analog signal processing, signal conditioning and so on. However, due to the CMOS technology downscaling, along the very large number of design variables and their trade-offs, it results difficult to reach target specifications without the application of optimization methods. For this reason, this work shows the advantages of performing many-objective optimization and this algorithm is compared to the well-known mono- and multi-objective metaheuristics, which have demonstrated their usefulness in sizing CMOS ICs. Three CMOS operational transconductance amplifiers are the case study in this work; they were sized by applying mono-, multi- and many-objective algorithms. The well-known non-dominated sorting genetic algorithm version 3 (NSGA-III) and the many-objective metaheuristic-based on the R2 indicator (MOMBI-II) were applied to size CMOS amplifiers and their sized solutions were compared to mono- and multi-objective algorithms. The CMOS amplifiers were optimized considering five targets, associated to a figure of merit (FoM), differential gain, power consumption, common-mode rejection ratio and total silicon area. The designs were performed using UMC 180 nm CMOS technology. To show the advantage of applying many-objective optimization algorithms to size CMOS amplifiers, the amplifier with the best performance was used to design a fractional-order integrator based on OTA-C filters. A variation analysis considering the process, the voltage and temperature (PVT) and a Monte Carlo analysis were performed to verify design robustness. Finally, the OTA-based fractional-order integrator was used to design a fractional-order chaotic oscillator, showing good agreement between numerical and SPICE simulations.

22 June 2020 in Electronics
Verified
Journal Article
Open access
PDF file
Esteban Tlelo-CuautleEsteban Tlelo-Cuautle
Esteban Tlelo-Cuautle
MPMartín Alejandro Valencia Ponce
Martín Alejandro Valencia Ponce
LFLuis G. De La Fraga
Luis G. De La Fraga
The sizes of the metal-oxide-semiconductor (MOS) transistors in an operational amplifier must guarantee strong direct current operating point (DCOP) conditions. This paper shows the usefulness of two population-based optimization algorithms to size transistors, namely—particle swarm optimization (PSO) and many optimizing liaisons (MOL). Both optimization algorithms link the circuit simulator SPICE to measure electrical characteristics. However, SPICE provides an output-file indicating that a transistor is in strong inversion but the DCOP can be in the limit, and it can switch to a different condition. In this manner, we highlight the application of PSO and MOL to size operational transconductance amplifiers (OTAs), which DCOP conditions are improved by the introduction of a procedure that handles constraints to ensure that the transistors are in the appropriate DCOP. The Miller and RFC-OTA are the cases of study, and their sizing is performed using UMC 180 nm CMOS technology. In both OTAs, the objective function is the maximization of the gain-bandwidth product under the main constraint of guaranteeing DCOPs to improve two figures of merit and to provide robustness to Monte Carlo simulations and PVT variations.

13 August 2021 in Mathematics
Verified
Journal Article
Open access
PDF file
MPMartín Alejandro Valencia Ponce
Martín Alejandro Valencia Ponce
Esteban Tlelo-CuautleEsteban Tlelo-Cuautle
Esteban Tlelo-Cuautle
LFLuis G. De La Fraga
Luis G. De La Fraga
The execution time that takes to perform numerical simulation of a chaotic oscillator mainly depends on the time-step h. This paper shows that the optimization of chaotic oscillators can be enhanced by estimating the highest h in either one-step or multi-step methods. Four chaotic oscillators are used as a case study, and the optimization of their Kaplan-Yorke dimension (DKY) is performed by applying three metaheuristics, namely: particle swarm optimization (PSO), many optimizing liaison (MOL), and differential evolution (DE) algorithms. Three representative one-step and three multi-step methods are used to solve the four chaotic oscillators, for which the estimation of the highest h is obtained from their stability analysis. The optimization results show the effectiveness of using a high h value for the six numerical methods in reducing execution time while maximizing the positive Lyapunov exponent (LE+) and DKY of the chaotic oscillators by applying PSO, MOL, and DE algorithms.

13 January 2023 in Electronics
Verified
Journal Article
Open access
PDF file
MPMartín Alejandro Valencia Ponce
Martín Alejandro Valencia Ponce
AGAstrid Maritza González-Zapata
Astrid Maritza González-Zapata
LFLuis G. De La Fraga
Luis G. De La Fraga
CSCarlos Sánchez-López
Carlos Sánchez-López
Esteban Tlelo-CuautleEsteban Tlelo-Cuautle
Esteban Tlelo-Cuautle
Nowadays, a huge amount of research is done on introducing and implementing new fractional-order chaotic systems. In the majority of cases, the implementation is done using embedded hardware, and very seldom does it use integrated circuit (IC) technology. This is due to the lack of design automation tools ranging from the system level down to layout design. At the system level, the challenge is guaranteeing chaotic behavior by varying all parameters while optimizing dynamical characteristics, such as the Lyapunov spectrum and the Kaplan–Yorke dimension. Using embedded hardware, the implementation is straightforward, but one must perform a scaling process for IC design, in which the biases may be lower than 1 volt but the amplitudes of the state variables of the chaotic systems can have values higher than one. In this manner, this paper describes three levels of abstraction to design fractional-order chaotic systems: The first one shows the optimization of a case study, the mathematical model of the fractional-order Lorenz system to find the fractional-orders of the derivatives, and the coefficients that generate better chaotic behavior. The second level is the block description of a solution of the mathematical model, in which the fractional-order derivatives are approximated in the Laplace domain by several approximation methods. The third level shows the IC design using complementary metal–oxide–semiconductor (CMOS) technology. The transfer functions approximating the fractional-order derivatives are synthesized by active filters that are designed using operational transconductance amplifiers (OTAs). The OTAs are also used to design adders and subtractors, and the multiplication of variables is done by designing a CMOS four-quadrant multiplier. The paper shows that the simulation results scaling the mathematical model to have amplitudes lower than ±1 are in good agreement with the results using CMOS IC technology of 180 nm.

14 September 2021 in Fractal and Fractional
Verified
Journal Article
Open access
PDF file
MPMartín Alejandro Valencia Ponce
Martín Alejandro Valencia Ponce
PCPerla Castañeda
Perla Castañeda
Esteban Tlelo-CuautleEsteban Tlelo-Cuautle
Esteban Tlelo-Cuautle
VCVictor Hugo Carbajal-Gómez
Victor Hugo Carbajal-Gómez
VGVictor Rodolfo Gonzalez-Diaz
Victor Rodolfo Gonzalez-Diaz
Jose-Cruz Nuñez-PerezJose-Cruz Nuñez-Perez
Jose-Cruz Nuñez-Perez
Fractional-order chaotic oscillators (FOCOs) have shown more complexity than integer-order chaotic ones. However, the majority of electronic implementations were performed using embedded systems; compared to analog implementations, they require huge hardware resources to approximate the solution of the fractional-order derivatives. In this manner, we propose the design of FOCOs using fractional-order integrators based on operational transconductance amplifiers (OTAs). The case study shows the implementation of FOCOs by cascading first-order OTA-based filters designed with complementary metal-oxide-semiconductor (CMOS) technology. The OTAs have programmable transconductance, and the robustness of the fractional-order integrator is verified by performing process, voltage and temperature variations as well as Monte Carlo analyses for a CMOS technology of 180 nm from the United Microelectronics Corporation. Finally, it is highlighted that post-layout simulations are in good agreement with the simulations of the mathematical model of the FOCO.