This review aims to elucidate relevant challenging issues on controllable wafer-scale preparation, additive patterning, and heterogeneous integration of van der Waals single crystals with uniform morphology and crystallographic orientation.
Strength and toughness are both of great importance for the application of polylactic acid (PLA). Unfortunately, these two properties are often contradictory. In this work, an effective and practical strategy is proposed by using carboxylated graphene oxide (GC) grafted with polyethylene glycol (PEG), i.e. GC-g-PEG. The synthesis procedure of GC-g-PEG is firstly optimized. Then, a series of PLA nanocomposites were prepared by the melt blending method via masterbatch. In comparison to that achieved over pure PLA, these nanocomposites are of higher crystallinity, thermal stability and mechanical strength. This is mainly attributed to well-tailored interface and good dispersion. Especially, while retaining the tensile strength of the original PLA, the elongation at break increases by seven times by adding 0.3 wt% GC-g-PEG.
The accumulation of ice on surfaces brings dangerous and costly problems to our daily life. Thus, it would be desirable to design anti-icing coatings for various surfaces. We report a durable anti-icing coating based on mussel-inspired chemistry, which is enabled via fabricating a liquid water layer, achieved by modifying solid substrates with the highly water absorbing property of sodium alginate. Dopamine, the main component of the mussel adhesive protein, is introduced to anchor the sodium alginate in order to render the coating applicable to all types of solid surfaces. Simultaneously, it serves as the cross-linking agent for sodium alginate; thus, the cross-linking degree of the coatings could be easily varied. The non-freezable and freezable water in the coatings with different cross-link degrees all remain liquid-like at subzero conditions and synergistically fulfill the aim of decreasing the temperature of ice nucleation. These anti-icing coatings display excellent stability even under harsh conditions. Furthermore, these coatings can be applied to almost all types of solid surfaces and have great promise in practical applications.