The influence of strain rate over domains involving the thermal activation and the viscous drag behaviour of the dislocations is discussed. While it is recognized that the Koslky–Hopkinson technique or split Hopkinson pressure bar technique can generate data up to the upper strain-rate limit of the thermal-activated regime, it is necessary to use a direct impact Hopkinson pressure bar technique to access the viscous regime. Data generated with this technique are presented for a series of metals, including steel, nickel, copper and tungsten alloys. The motivation to generate such data is provided through three industrial applications.

This work concerns the sintering of tungsten-based (i.e WMoTaNb) high entropy alloy (HEA) powders using the spark plasma sintering (SPS) technique and their mechanical properties. The synthesis was performed by a self-propagating high-temperature synthesis (SHS) type reaction in which the mixture of metallic oxides (WO₃, MoO₃ …) is reduced by magnesium. For this, a specific reactor has been developed. Different conditions including the addition of a moderator were tested. These powders are then densified by SPS technology which allows for keeping the initial microstructure of the powder. The optimization of sintering conditions was performed with the objective to control simultaneously the chemical composition, the grain growth and the densification stages.

Due to molybdenum’s Body-Centered Cubic (BCC) crystalline structure, its ductile–brittle transition temperature is sensitive to shaping, purity and microstructure. Dense molybdenum parts are usually shaped by the powder metallurgy process. The aim of this work concerns the spark plasma sintering of high-purity powders prepared by inductively coupled plasma. The influence of carbon diffusion and its interaction with oxygen on the density (i.e., the densification stage) and on the microstructure (i.e., the grain growth stage) during spark plasma sintering was investigated. The formation of carbide is usually expected for a sintering temperature above 1500 °C leading to grain growth (e.g., more than 10 times larger than the initial powder grain size after sintering at 1900 °C for 10 min). The brittleness was also affected by the segregation of molybdenum carbides at the grain boundaries (i.e., intergranular brittle fracture). Consequently, to reduce the sintering temperature to below 1500 °C, mechanically activated powders were used. From these milled powders, a dense molybdenum disc (60 mm in diameter and 10 mm in thickness) sintered at 1450 °C under a pressure of 70 MPa for 30 min was obtained. It is composed of a fine microstructure without carbide and oxide, its ductility is close to 13% with a maximum resistance of 550 MPa.

EPJ Web of Conferences, open-access proceedings in physics and related sciences

Failure processes encountered in the Taylor impact specimen are of two kinds, Mode II cracks initiating within adiabatic shear bands and tensile cracks. Because friction occurring with the single Taylor configuration influences the failure processes, it is necessary to use the symmetric loading procedure providing frictionless interfaces. Numerical simulations of the symmetric Taylor test have been conducted to reproduce the failure processes observed with a highly ductile nickel and a high strength tungsten alloy. Because the adiabatic shear failure process is occurring along a three dimension path, the 3D module of the hydrocode AUTODYN was used.

The influence of strain rate on the mechanical response of two different nanostructured pure coppers was investigated under uniaxial compression. The first nanostructured copper was elaborated by powder metallurgy using the Spark Plasma Sintering (SPS) process. The second nanostructured copper was elaborated by Severe Plastic Deformation (SPD). Conventional characterizations were conducted with quasi-static compression and tensile tests, hardness tests and, with microstructure analysis. The effect of strain rate was evaluated under uniaxial compression at strain rates varying from 10^-4 to 10⁺⁴ s^-1. The high strain rate data were generated with a direct Hopkinson impact technique. The increase of strength with strain rates was analysed and discussed from the Scanning Electron Microscope observations and grain size distribution. The mechanical properties are consequently dependent on the metallurgical history of these samples prepared according to two different routes.