M. Hossain Mohammadi

Dr. M. Hossain Mohammadi

orcid

Research Focus & Metrics

Academic Career Length

14Years (2013-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
16 January 2020 in IEEE Transactions on Magnetics
Verified
Journal Article
Closed access
AKArbaaz Khan
Arbaaz Khan
MMM. Hossain Mohammadi
M. Hossain Mohammadi
VGVahid Ghorbanian
Vahid Ghorbanian
DLDavid Lowther
David Lowther
A new method for predicting efficiency maps of electric motor drives is proposed using deep learning. Since many operating points need to be simulated using finite element analysis to estimate the efficiency map of a single motor drive topology with certain geometry dimensions and materials, incorporating the whole efficiency map into the design optimization process is an overwhelmingly time-consuming task and may be impossible, depending on the availability of computational resources. Therefore, two deep learning (DL) network architectures are employed in this work to quickly and accurately predict efficiency maps. In the first architecture, the two important stages of efficiency map calculations, i.e. the flux linkage maps and the torque-speed envelopes, are replaced by a combination of recurrent and feedforward neural networks to account for geometric and operating point variations. For the second architecture, an end-to-end DL model was trained to predict the same efficiency maps. The output of the proposed methods has a good match with that of the finite element solution, indicating a high prediction accuracy as well as low run-time useful for design and optimization problems.

15 October 2015 in IEEE Transactions on Magnetics
Verified
Journal Article
Closed access
MMM. Hossain Mohammadi
M. Hossain Mohammadi
TRT. Rahman
T. Rahman
RSR. Silva
R. Silva
MLM. Li
M. Li
DLD. A. Lowther
D. A. Lowther
A generalizable algorithm is proposed for the design optimization of synchronous reluctance machine rotors. Single-barrier models are considered to reduce the algorithm's computational complexity and provide a relative comparison for rotors with different slots-per-pole combinations. Two objective values per sampled design (average and ripple torques) are computed using 2-D finite-element analysis simulations. Non-linear regression or surrogate models are trained for the two objectives through a Bayesian regularization backpropagation neural network. A multi-objective genetic algorithm is used to find the validated Pareto front solutions. An analytical ellipse constraint is then suggested to encapsulate optimal solutions. Compared with a direct sampling approach, this restriction captures an optimal region within the double-barrier space for further torque ripple reduction.

1 February 2017 in IEEE Transactions on Magnetics
Verified
Journal Article
Closed access
MMM. Hossain Mohammadi
M. Hossain Mohammadi
DLDavid Alister Lowther
David Alister Lowther
After designing and optimizing an electric machine, efficiency maps are needed to predict a vehicle's performance in a dynamic simulation. Calculating efficiencies at various torque and speed points, however, requires prior knowledge of the input excitation conditions, such as the current magnitude and advance angle, in an electromagnetic finite-element analysis simulation. Hence, this paper derives and uses nonlinear motor control equations (MTPA, FW, MTPV) in the study of efficiency map calculation while accounting for both saturation and cross-coupling effects. Two synchronous ac motors are considered in this paper, including the 2010 Prius IPM and a PM-assisted synchronous reluctance machine, with all procedure steps outlined in detail.

26 September 2017 in IEEE Transactions on Industrial Electronics
Verified
Journal Article
Closed access
RSRodrigo Cesar Pedrosa Silva
Rodrigo Cesar Pedrosa Silva
TRTanvir Rahman
Tanvir Rahman
MMM. Hossain Mohammadi
M. Hossain Mohammadi
DLDavid Alister Lowther
David Alister Lowther
A general strategy for the multiobjective optimization of electric machines with respect to multiple operating conditions is proposed and applied to two 10-pole 12-slot fractional slot concentrated winding (FSCW) machines. To define an optimization problem, including the effects of multiple operating points, both sensitivity analysis and conflict analysis of the design objectives were incorporated into the proposed strategy. An objective-reduction algorithm was applied in order to make the optimization process affordable under a limited computational budget. The effects of incorporating multiple operating points on the optimization of 10-pole 12-slot FSCWs are presented. The proposed methodology can be applied to solve motor optimization problems with a high number of objectives, in general.

13 January 2020 in IEEE Transactions on Magnetics
Verified
Journal Article
Closed access
IIIssah Ibrahim
Issah Ibrahim
RSRodrigo Silva
Rodrigo Silva
MMM. Hossain Mohammadi
M. Hossain Mohammadi
VGVahid Ghorbanian
Vahid Ghorbanian
DLDavid A. Lowther
David A. Lowther
Design and optimization problems typically require running thousands of motor simulations, which could take several hours if not days. Finding alternative means of reducing the solution time has recently gained research interest. Surrogate models can emulate the outputs of computer simulations with less computational effort. This paper proposes the use of surrogate models to predict the acoustic noise, applied to an interior permanent-magnet synchronous motor (IPMSM). The simulation procedure involves using finite element analysis to evaluate the acoustic performance across a design space of stator and rotor geometric variations. Then, four different classes of surrogate models are used to learn a portion of the design space before attempting to generalize and make predictions in a much larger space with relatively less computational burden. It is demonstrated that the trained models can be considered as appropriate replacements of the time-consuming FEA for future design and optimization problems of the same motor case study.

9 November 2017 in IEEE Transactions on Magnetics
Verified
Journal Article
Closed access
MMM. Hossain Mohammadi
M. Hossain Mohammadi
TRT. Rahman
T. Rahman
RSR. C. P. Silva
R. C. P. Silva
BWB. Wang
B. Wang
KCK. Chang
K. Chang
DLD. A. Lowther
D. A. Lowther
This paper investigates the rotor design optimization of synchronous reluctance machines (SynRMs) by using electromagnetic and structural finite-element simulations. Three conflicting objectives, i.e., average torque, torque ripple, and sound pressure level, were considered using a surrogate-based multi-objective approach. While the stator is fixed, the rotor flux barriers of a 33-slot 8-pole SynRM were geometrically varied to extract optimal design regions. These regions or constraints help decrease the computational time during the sampling procedure of a multiple-barrier design. Different numbers of flux barriers were studied and related to each other. Adding the sound pressure level was observed to affect previous results by spreading the Pareto front solutions across the design space.