In this paper, a new rheological model for the flow of phosphate-water suspensions is proposed. The model’s ability to replicate the rheological characteristics of phosphate-water suspensions under different shear rate conditions is evaluated using rheometric tests, and it is found to be in good agreement with experimental data. A comprehensive methodology for obtaining the model parameters is presented. The proposed model is then incorporated into the OpenFoam numerical code. The results demonstrate that the model is capable of reproducing the rheological behavior of phosphate suspensions at both low and high concentrations by comparing it with suitable models for modeling the rheological behavior of phosphate suspensions. The proposed model can be applied to simulate and monitor phosphate slurry flows in industrial applications.
1 July 2016 in South African Journal of Chemical Engineering
The thermodynamic features of hydrogen production via chemical looping reforming of waste cooking oil were studied at atmospheric pressure using Gibbs free energy minimization, accounting for the possibility of coke formation. The synthesis gas composition was determined as a function of reforming temperature (400–1000 °C), steam to carbon ratio (S/C, 1–14) and NiO to carbon ratio (NiO/C, 0–2). To evaluate the thermodynamically plausible products, the study started with an expanded product set of approximately 30 by-products.The results show that coke formation can be thermodynamically inhibited by increasing the S/C ratio and/or the NiO/C ratio. The conditions that maximize hydrogen production, minimize methane and carbon monoxide content as well as avoid coke formation at thermoneutral conditions were found to be S/C = 5, T = 600 °C and NiO/C = 0.493. Under these conditions, a hydrogen yield of 144.3 mol/kg of soybean waste cooking oil can be obtained, which appears to be an attractive result for starting experimental research