Onsite non-potable reuse (NPR) is being increasingly considered as a viable option to address water scarcity and infrastructure challenges, particularly at the building scale. However, there are a range of possible treatment technologies, source water options, and treatment system sizes, each with its unique costs and benefits. While demonstration projects are proving that these systems can be technologically feasible and protective of public health, little guidance exists for identifying systems that balance public health protection with environmental and economic performance. This study uses quantitative microbial risk assessment, life cycle assessment and life cycle cost analysis to characterize the human health, environmental and economic aspects of onsite NPR systems. Treatment trains for both mixed wastewater and source-separated graywater were modeled using a core biological process—an aerobic membrane bioreactor (AeMBR), an anaerobic membrane bioreactor (AnMBR) or recirculating vertical flow wetland (RVFW)—and additional treatment and disinfection unit processes sufficient to meet current health-based NPR guidelines. Results show that the graywater AeMBR system designed to provide 100% of onsite non-potable demand results in the lowest impacts across most environmental and human health metrics considered but costs more than the mixed-wastewater version due to the need for a separate collection system. The use of multiple metrics also allows for identification of weaknesses in systems that lead to burden shifting. For example, although the RVFW process requires less energy than the AeMBR process, the RVFW system is more environmentally impactful and costly when considering the additional unit processes required to protect human health. Similarly, we show that incorporation of thermal recovery units to reduce hot water energy consumption can offset some environmental impacts but result in increases to others, including cumulative energy demand. Results demonstrate the need for additional data on the pathogen treatment performance of NPR systems to inform NPR health guidance.

With increasing populations, mounting environmental pressures and aging infrastructure, urban water and wastewater utilities have to make investment decisions limited by both economic and environmental constraints. The challenges facing urban water systems can no longer be sustainably solved by traditional siloed water management approaches. A central premise of contemporary urban water management paradigms is that in order for urban water systems to be more sustainable and economical, an improvement in resource use efficiency at system level must be achieved. This study provides a quantification of the total resource use of a typical urban water system exemplified in Greater Cincinnati region from raw water extraction for drinking water to wastewater treatment and discharge, providing a better understanding of resource expenditure distributions within the system and a necessary benchmark to which future system improvements can be compared. The emergy methodology was used so that the total environmental work required to produce disparate system inputs could be expressed using a common unit. The results were compared to the concurring life cycle assessment (LCA) and life cycle costing (LCC) results of the same system. Emergy results highlight drinking water treatment and drinking water distribution as two resource-intensive stages, with energy for pumping and chemicals for conditioning representing the greatest inputs to the former and energy for pumping and metals for piping representing the greatest inputs to the latter. For wastewater collection and treatment stages, aeration and sludge handling were identified as the highest emergy unit processes, mostly due to energy use. Comparison with LCA results substantiate the environmental concerns associated with energy use in the drinking water treatment and distribution stages but indicate that environmental burdens associated with infrastructure are more dependent upon upstream resource use rather than downstream environmental impact. Results from emergy, LCA and LCC point towards aeration and sludge handling as two unit processes on the wastewater side that are particularly costly and environmentally impactful. Results in total are used to suggest alternative strategies that can alleviate identified environmental burdens and economic costs.

The urban environment is a patchwork of natural and artificial surfaces that results in complex interactions with and impacts to natural hydrologic cycles. Evapotranspiration is a major hydrologic flow that is often altered through urbanization, although the mechanisms of change are sometimes difficult to tease out due to difficulty in effectively simulating soil–plant–atmosphere interactions. This paper introduces a simplified yet realistic model that is a combination of existing surface runoff and ecohydrology models designed to increase the quantitative understanding of complex urban hydrologic processes. Results demonstrate that the model is capable of simulating the long-term variability of major hydrologic fluxes as a function of impervious surface, temperature, water table elevation, canopy interception, soil characteristics, precipitation and complex mechanisms of plant water uptake. These understandings have potential implications for holistic urban water system management.