María C. Yeber

Dr. María C. Yeber

Universidad Católica de la Santísima Concepción
orcid

Research Focus & Metrics

Academic Career Length

20Years (2007-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 June 2019 in Journal of Hazardous Materials
Verified
Journal Article
Closed access
JNJ. Núñez
J. Núñez
MYMaría C. Yeber
María C. Yeber
NCN. Cisternas
N. Cisternas
RTR. Thibaut
R. Thibaut
PMP. Medina
P. Medina
CCC. Carrasco
C. Carrasco

11 September 2012 in Desalination and Water Treatment
Verified
Journal Article
Open access
MYMaría C. Yeber
María C. Yeber
EPElvira Paul
Elvira Paul
CSCarolina Soto
Carolina Soto
The remediation efficiency of oil containing wastewater was evaluated employing an integrated photocatalytic and biological treatment. Both the photocatalytic and biological treatments were carried out in batch reactors using TiO2 as the photocatalyst. The effects of TiO2 concentration, pH, and reaction time were optimized by the experimental design, achieving 90.0% of oil removal in 30 min of reaction time at pH = 5.0, with a reaction rate constant of 0.027 min−1 (R 2 = 0.71). For biological treatment, we used the bacteria Pseudomonas aeruginosa in biofilms. The biological treatment alone achieved 66.5% of oil removal in just 45 min of treatment, with a reaction rate constant of 0.018 min−1 (R 2 = 0.99). To augment the process efficiency, we integrated both the chemical and biological treatments, achieving 99.0% of oil and 78.6% total organic carbon (TOC mg L−1) removal. The concept of experimental design adopted to optimize the photocatalytic process saved time and generated adequate estimates of the experimental variables, which were validated by the reaction kinetics.


27 February 2007 in Environmental Science & Technology
Verified
Journal Article
Closed access
MYMaría C. Yeber
María C. Yeber
KOKatherine P. Oñate
Katherine P. Oñate
GVGladys Vidal
Gladys Vidal

1 November 2015 in Desalination and Water Treatment
Verified
Journal Article
Open access
MYMaría C. Yeber
María C. Yeber
GGGustavo García
Gustavo García
The combination of persulfate, zerovalent iron, and UV radiation is an advanced oxidation process which allows for the degradation of high concentrations of organic dyes. This process is based on the generation of transient species with high oxidizing power, mainly the hydroxyl radical ( ) and the sulfate radical ( ). The reaction was carried out in a cylindrical glass reactor using potassium peroxydisulfate as an oxidant and zerovalent iron as a catalyst. The reaction was performed in a radiation chamber using a Philips HP-120 W lamp (λ ≥ 254 nm). A Box–Behnken design and response surface methodology were employed to evaluate the effect of persulfate dosage (0.01 (−1)–0.05 (+1) g L−1), iron dosage (0.01 (−1)–0.05 (+1) g L−1), pH (2 (−1)–11 (+1)), and reaction time (10 (−1)–120 (+1) min) on the reduction of 100 mg L−1 of Kraft Lignin. Optimization of the process determined that optimal experimental conditions were acidic pH (3.5), a persulfate concentration of 0.05 g L−1, a zerovalent iron concentration of 0.01 g L−1, and 60 min of reaction time, which resulted in 92% removal of Kraft Lignin, 96% chemical oxygen demand, 94% phenols, and 61.1% total organic carbon. The results indicate that the photocatalytic system was efficient in degrading a high concentration Kraft Lignin, and experimental design allowed determination of the maximum efficiency, with a 95% confidence interval.

2 December 2025 in Water
Verified
Journal Article
Open access
PDF file
MYMaría C. Yeber
María C. Yeber
BPBastian Paredes
Bastian Paredes
The textile industry releases effluents containing toxic contaminants such as azo dyes, which severely affect water quality and aquatic ecosystems. This study optimized the Fe0/H2O2/UV photo-Fenton process through Response Surface Methodology (RSM) using a Box–Behnken design applied to real textile wastewater. The process relies on in situ hydroxyl radicals (•OH) generation, which degrades refractory organic compounds. Under optimal conditions (pH 3.5, 0.5 g Fe0, and 0.55 mL H2O2), the system achieved complete color removal, 91% aromatic structures degradation, and an 80% COD reduction within 3 h. Statistical validation indicated an excellent model fit (R2 = 1.0; Q2 = 1.0), with strong correlation between experimental and predicted results. Spectroscopic analyses (UV–Vis and FTIR) further confirmed the cleavage of chromophoric and aromatic structures, indicating efficient pollutant degradation. Overall, the findings indicate that the Fe0/H2O2/UV system is an effective and sustainable technology for treating textile wastewater, offering strong potential for industrial-scale application.