Recovering and concentrating rare earth metals (Nd and Dy) from waste permanent magnets rather than discarding them into the environment without pretreatment is critical for metal recycling and environmental responsibility. In this work, we used an undiluted hydrophobic pseudoprotic ionic liquid composed of trioctylamine and decanoic acid as an extractant to separate rare earth metals from aqueous media with a solvent extraction technique. This ionic liquid proved to be excellent with low viscosity and extractability reaching 100% for Nd and Dy in the presence of salts like sodium chloride and sodium nitrate. In acidic media, extractability decreased with increasing acid concentrations. Under all our experimental conditions, the rare earth metals (Nd and Dy) were found to be preferentially extracted compared to nickel with the distribution ratios of Dy higher than those of Nd.

This study presents a set of vibrational characterizations on a nanogel-cross-linked porous freeze-dried gel (NanoCliP-FD gel) scaffold for tissue engineering and regenerative therapy. This scaffold is designed for the in vitro culture of high-quality cartilage tissue to be then transplanted in vivo to enable recovery from congenital malformations in the maxillofacial area or crippling jaw disease. The three-dimensional scaffold for in-plate culture is designed with interface chemistry capable of stimulating cartilage formation and maintaining its structure through counteracting the dedifferentiation of mesenchymal stem cells (MSCs) during the formation of cartilage tissue. The developed interface chemistry enabled high efficiency in both growth rate and tissue quality, thus satisfying the requirements of large volumes, high matrix quality, and superior mechanical properties needed in cartilage transplants. We characterized the cartilage tissue in vitro grown on a NanoCliP-FD gel scaffold by human periodontal ligament-derived stem cells (a type of MSC) with cartilage grown by the same cells and under the same conditions on a conventional (porous) atelocollagen scaffold. The cartilage tissues produced by the MSCs on different scaffolds were comparatively evaluated by immunohistochemical and spectroscopic analyses. Cartilage differentiation occurred at a higher rate when MSCs were cultured on the NanoCliP-FD gel scaffold compared to the atelocollagen scaffold, and produced a tissue richer in cartilage matrix. In situ spectroscopic analyses revealed the cell/scaffold interactive mechanisms by which the NanoCliP-FD gel scaffold stimulated such increased efficiency in cartilage matrix formation. In addition to demonstrating the high potential of human periodontal ligament-derived stem cell cultures on NanoCliP-FD gel scaffolds in regenerative cartilage therapy, the present study also highlights the novelty of Raman spectroscopy as a non-destructive method for the concurrent evaluation of matrix quality and cell metabolic response. In situ Raman analyses on living cells unveiled for the first time the underlying physiological mechanisms behind such improved chondrocyte performance.

The transplantation of engineered three-dimensional (3D) bone graft substitutes is a viable approach to the regeneration of severe bone defects. For large bone defects, an appropriate 3D scaffold may be necessary to support and stimulate bone regeneration, even when a sufficient number of cells and cell cytokines are available. In this study, we evaluated the in vivo performance of a nanogel tectonic 3D scaffold specifically developed for bone tissue engineering, referred to as nanogel cross-linked porous-freeze-dry (NanoCliP-FD) gel. Samples were characterized by a combination of micro-computed tomography scanning, Raman spectroscopy, histological analyses, and synchrotron radiation–based Fourier transform infrared spectroscopy. NanoCliP-FD gel is a modified version of a previously developed nanogel cross-linked porous (NanoCliP) gel and was designed to achieve highly improved functionality in bone mineralization. Spectroscopic imaging of the bone tissue grown in vivo upon application of NanoCliP-FD gel enables an evaluation of bone quality and can be employed to judge the feasibility of NanoCliP-FD gel scaffolding as a therapeutic modality for bone diseases associated with large bone defects.

Lactic acid that is prepared by fermentation is a compound in food, cosmetic pharmaceutical, and chemical industries. Since a simple technique is desired that separates lactic acid from the cultures, we propose lactic acid permeation through a poly(vinyl chloride)(PVC)-based membrane that contains deep eutectic solvents (DESs) as a carrier. Lactic acid was successfully permeated through polymer inclusion membranes (PIMs) containing hydrophilic DESs, urea-choline chloride and glucose-choline chloride. The permeation behavior was explained by the facilitated transport mechanism based on the solution-diffusion model. Simple preparation of thinner membranes in the PIM process and higher permeation rates are advantages over the supported liquid membrane process. The PVC-based membrane process containing environmentally benign hydrophilic DESs is promising for lactic acid separation on an industrial scale.

Adsorption using natural compounds is an attractive separation technique for recovering heavy metals from aqueous media. Although chitosan, which is a natural polysaccharide, is an environmentally benign adsorbent, it dissolves in an acidic aqueous medium. In this study, we prepared adsorbents consisting of chitosan modified with amidoxime groups for improving metal adsorptivity, and cellulose for improving gel stability using an ionic liquid, and examined their adsorption characteristics for metal ions. The prepared amidoxime-chitosan/cellulose hydrogels had a mechanical strength without cross-linking. All the investigated metals were adsorbed on the amidoxime-chitosan/cellulose hydrogels in the following adsorptivity order: Cu ≈ Ag > Ni > Zn. The adsorptivity of the metal ions increased with pH due to a proton exchange reaction. From the Langmuir adsorption isotherm, the Langmuir constant for Cu exceeded those of other metals because amidoxime has higher Cu affinity. The pseudo-second-order reaction model best described the adsorption kinetics with metal chelate formation being the rate-determining step. Because amidoxime-chitosan/cellulose hydrogels had higher physical stability and higher Cu selectivity, they were found to be a promising, environmentally benign adsorbent.

Novel functional biomaterials are expected to bring about breakthroughs in developing immunotherapy and regenerative medicine through their application as drug delivery systems and scaffolds. Nanogels are defined as nanoparticles with a particle size of 100 nm or less and as having a gel structure. Nanogels have a three-dimensional network structure of cross-linked polymer chains, which have a high water content, a volume phase transition much faster than that of a macrogel, and a quick response to external stimuli. As it is possible to transmit substances according to the three-dimensional mesh size of the gel, a major feature is that relatively large substances, such as proteins and nucleic acids, can be taken into the gel. Furthermore, by organizing nanogels as a building block, they can be applied as a scaffold material for tissue regeneration. This review provides a brief overview of the current developments in nanogels in general, especially drug delivery, therapeutic applications, and tissue engineering. In particular, polysaccharide-based nanogels are interesting because they have excellent complexation properties and are highly biocompatible.