This guideline on current good radiopharmacy practice (cGRPP) for small-scale preparation of radiopharmaceuticals represents the view of the Radiopharmacy Committee of the European Association of Nuclear Medicine (EANM). The guideline is laid out in the format of the EU Good Manufacturing Practice (GMP) guidelines as defined in EudraLex volume 4. It is intended for non-commercial sites such as hospital radiopharmacies, nuclear medicine departments, research PET centres and in general any healthcare establishments. In the first section, general aspects which are applicable to all levels of operations are discussed. The second section discusses the preparation of small-scale radiopharmaceuticals (SSRP) using licensed generators and kits. Finally, the third section goes into the more complex preparation of SSRP from non-licensed starting materials, often requiring a purification step and sterile filtration. The intention is that the guideline will assist radiopharmacies in the preparation of diagnostic and therapeutic SSRP’s safe for human administration.

Background: To fulfil good manufacturing requirements, analytical methods for the analysis of pharmaceuticals for human and vetinary use must be validated. The International Conference on Harmonization of Technical Requirements for Registration of Pharmaceuticals for Human Use (ICH) has published guidance documents on the requirements for such validation activities and these have been adopted by the European Medicines Agency, The U.S. Food and Drug Administration (FDA) and other regulatory bodies. These guidance documents do not, however, fully address all the specific tests required for the analysis of radiopharmaceuticals. This guideline attempts to rectify this shortcoming, by recommending approaches to validate such methods. Results: Recommedations for the validation of analytical methods which are specific for radiopharmaceutials are presented in this guideline, along with two practical examples. Conclusions: In order to comply with good manufacturing practice, analytical methods for radiopharmaceuticals for human use should be validated.

Transformations of extracellular matrix (ECM) accompany pathological tissue changes, yet how cell-ECM crosstalk drives these processes remains unknown as adequate tools to probe forces or mechanical strains in tissues are lacking. Here, we introduce a new nanoprobe to assess the mechanical strain of fibronectin (Fn) fibers in tissue, based on the bacterial Fn-binding peptide FnBPA5. FnBPA5 exhibits nM binding affinity to relaxed, but not stretched Fn fibers and is shown to exhibit strain-sensitive ECM binding in cell culture in a comparison with an established Fn-FRET probe. Staining of tumor tissue cryosections shows large regions of relaxed Fn fibers and injection of radiolabeled ¹¹¹In-FnBPA5 in a prostate cancer mouse model reveals specific accumulation of ¹¹¹In-FnBPA5 in tumor with prolonged retention compared to other organs. The herein presented approach enables to investigate how Fn fiber strain at the tissue level impacts cell signaling and pathological progression in different diseases.

The favorable decay properties of 43Sc and 44Sc for PET make them promising candidates for future applications in nuclear medicine. An advantage 43Sc (T1/2 = 3.89 h, Eβ+ av = 476 keV [88%]) exhibits over 44Sc, however, is the absence of co-emitted high energy γ-rays. While the production and application of 44Sc has been comprehensively discussed, research concerning 43Sc is still in its infancy. This study aimed at developing two different production routes for 43Sc, based on proton irradiation of enriched 46Ti and 43Ca target material. 43Sc was produced via the 46Ti(p,α)43Sc and 43Ca(p,n)43Sc nuclear reactions, yielding activities of up to 225 MBq and 480 MBq, respectively. 43Sc was chemically separated from enriched metallic 46Ti (97.0%) and 43CaCO3 (57.9%) targets, using extraction chromatography. In both cases, ~90% of the final activity was eluted in a small volume of 700 μL, thereby, making it suitable for direct radiolabeling. The prepared products were of high radionuclidic purity, i.e. 98.2% 43Sc were achieved from the irradiation of 46Ti, whereas the product isolated from irradiated 43Ca consisted of 66.2% 43Sc and 33.3% 44Sc. A PET phantom study performed with 43Sc, via both nuclear reactions, revealed slightly improved resolution over 44Sc. In order to assess the chemical purity of the separated 43Sc, radiolabeling experiments were performed with DOTANOC, attaining specific activities of 5–8 MBq/nmol, respectively, with a radiochemical yield of >96%. It was determined that higher 43Sc activities were accessible via the 43Ca production route, with a comparatively less complex target preparation and separation procedure. The product isolated from irradiated 46Ti, however, revealed purer 43Sc with minor radionuclidic impurities. Based on the results obtained herein, the 43Ca route features some advantages (such as higher yields and direct usage of the purchased target material) over the 46Ti path when aiming at 43Sc production on a routine basis.

This is a position paper of the Radiopharmacy Committee of the EANM (European Association of Nuclear Medicine) addressing toxicology studies for application of new diagnostic and therapeutic radiopharmaceuticals (RP) that are not approved (i.e., not having a marketing authorization or a monograph in the European Pharmacopoeia), excluding endogenous and ubiquitous substances in humans. This paper discusses the requirements for clinical trials with radiopharmaceuticals for clinical research applications, not necessarily intended to aim at a marketing authorization. If marketing authorization is intended, scientific advice of the competent authorities is mandatory and cannot be replaced by this position paper. The position paper reflects the view of the Radiopharmacy Committee of the EANM and can be used as a basis for discussions with the responsible authorities.

Validation and qualification activities are nowadays an integral part of the day by day routine work in a radiopharmacy. This document is meant as an Appendix of Part B of the EANM “Guidelines on Good Radiopharmacy Practice (GRPP)” issued by the Radiopharmacy Committee of the EANM, covering the qualification and validation aspects related to the small-scale “in house” preparation of radiopharmaceuticals. The aim is to provide more detailed and practice-oriented guidance to those who are involved in the small-scale preparation of radiopharmaceuticals which are not intended for commercial purposes or distribution. The present guideline covers the validation and qualification activities following the well-known “validation chain”, that begins with editing the general Validation Master Plan document, includes all the required documentation (e.g. User Requirement Specification, Qualification protocols, etc.), and leads to the qualification of the equipment used in the preparation and quality control of radiopharmaceuticals, until the final step of Process Validation. A specific guidance to the qualification and validation activities specifically addressed to small-scale hospital/academia radiopharmacies is here provided. Additional information, including practical examples, are also available.