Physical unclonable function (PUF), a hardware that can extract the differences of the same implementations and provide unique secret keys without the utilization of non-volatile memory, is regarded as a promising security primitive in the near future. Ring Oscillator (RO) PUF is one of its easy silicon implementations, which exploits the frequency difference between a pair of structurally identical ring oscillators. However, a large number of ROs must be constructed if multiple stable output bits are required, which means unacceptable area overhead for lightweight applications. To solve this problem, configurable ROs using multiplexers and different delay units were proposed in previous papers. Unfortunately, most of them take advantage of the specific structure of a certain type of field-programmable gate arrays (FPGAs), thus not cost-saving for application-specific integrated circuit (ASIC). In this paper, we propose a configurable RO using only two hybrid logic gates in each stage for ASIC, which costs less area and power compared with previous proposals. Experiment on 50 FPGAs and one self-designed printed circuit board demonstrates satisfactory uniformity and uniqueness of this novel RO PUF. Furthermore, our proposal is proved to be reliable in a wide variety of environment conditions.
Physical unclonable function (PUF), a reliable physical security primitive, can be implemented in FPGAs and ASICs. Strong PUF is an important PUF classification that provides a large “Challenge-Response”. pairs (CRP) space for device authentication. However, most of traditional Strong PUF designs represented by the arbiter PUF are difficult to implement on FPGA. We propose a new lightweight Strong PUF design that can dynamically reconfigure while maintaining high entropy and large CRP space. We implement the PUF on a 28nm FPGA. The experimental results show that the uniformity of the PUF is 49.8%, the uniqueness is 49.9%, which is close to the ideal value, and the hardware overhead is very small. This design is easy to implement and suitable for device authentication on FPGA
10 December 2020 in CCF Transactions on High Performance Computing
Physical unclonable function (PUF) is a reliable physical security primitive. The Weak PUF and Strong PUF are two well-known PUF topologies. Strong PUF can be used to authenticate and protect intellectual property on FPGA chips. Classic PUF designs, like arbiter PUF, are hard to implement on FPGA and severely threatened by the machine learning based modeling attacks. In this work, we propose a new Strong PUF on FPGA by combining Weak PUF with obfuscation logic. Experiment results on a 28nm FPGA show that the resistance to modeling attack is good and the hardware overhead is small.
In triple-well PMOSFET transistor, a deep n+ well (DNW) is a process used to isolate the substrate noise, which can lead to changes in effect of single event transient (SET). In outer space, collision of cosmic energetic particles with sensitive nodes of integrated circuits can generate electron-hole pairs. The probability of recombination of electrons and holes is different, which results in transient changes of sensitive nodes’ state. Transient potential change is transmitted to the output terminal, that is, a single event transient. In this paper, measured SET effect characteristics of PMOSFET transistors in 65 nm process are performed with heavy particle experiments. Compared with triple-well PMOSFET transistor, the experimental data show that the average of SET pulse width in double-well PMOSFET is increased by 19.4% (Ge linear energy transfer (LET) = 37.4 MeV7cm2/mg) and 14.4% (Ti LET = 22.2 MeV7cm2/mg). The data show that a triple-well PMOSFET transistor is better for SET, which is be appropriate for radiation hardened integrated circuits (ICs) design.
30 June 2023 in Journal of Information Security and Applications