The magnetoresistance and the V-I curves (I>) of a well-characterized Ag-clad (Bi,Pb tape (BPSCCO) with (77 K, B=0)=10 kA/ have been analyzed in the temperature (T) range 80–110 K and magnetic field (B) up to 60 mT. The results obtained after the correction for the parallel conduction through the Ag sheathing and BPSCCO core are similar to those for corresponding single crystals and the epitaxial thin films. The effective activation energy for the flux creep is larger than those for the single crystals and thin films of Bi-Sr-Ca-Cu-O (BSCCO) compound. The variations of the differential resistance (deduced from V-I curves at I≫) with T and B are consistent with those for the conventional type-II superconductors at elevated temperatures and low fields. Hence the unusual features deduced from the total dissipation in similar tapes are probably due to improper data analysis. The analysis presented here relies on the homogeneity of dissipation within the core which has to be checked for each tape.
The study of the transition from high-entropy alloys (HEAs) to conventional alloys (CAs) composed of the same alloying components is apparently important, both for understanding the formation of HEAs and for proper evaluation of their potential with respect to that of the corresponding CAs. However, this transition has thus far been studied in only two types of alloy systems: crystalline alloys of iron group metals (such as the Cantor alloy and its derivatives) and both amorphous (a-) and crystalline alloys, TE-TL, of early (TE = Ti, Zr, Nb, Hf) and late (TL = Co, Ni, Cu) transition metals. Here, we briefly overview the main results for the transition from HEAs to CAs in these alloy systems and then present new results for the electronic structure (ES), studied with photoemission spectroscopy and specific heat, atomic structure, thermal, magnetic and mechanical properties of a-TE-TL and Cantor-type alloys. A change in the properties of the alloys studied on crossing from the HEA to the CA concentration range mirrors that in the ES. The compositions of the alloys having the best properties depend on the alloy system and the property selected. This emphasizes the importance of knowing the ES for the design of new compositional complex alloys with the desired properties.
In this article, we describe the characterization of a newly fabricated amorphous alloy system (TiZrNbCu)1−xCox covering a broad composition range from high-entropy (HEA) to Co-rich alloys (x ≤ 0.43). We investigated thermal stability, atomic and electronic structure, and magnetic and mechanical properties as a function of chemical composition x. One of the important findings is that all studied properties change their dependence on concentration x within the HEA range. In particular, it has been found that the average atomic volume deviates from Vegard’s law for x > 0.2, the concentration for which the average atomic packing fraction suddenly changes. The valence band structure, studied with ultraviolet photoemission spectroscopy, shows a split-band shape with 3d-states of Co approaching the Fermi level on increasing x. Due to the onset of magnetic correlations, magnetic susceptibility rapidly increases for x > 0.25. Very high microhardness increases rapidly with x. The results are compared with those for similar binary and quinary metallic glasses and with those for Cantor type of crystalline alloys.
A study of a transition from conventional multicomponent alloys to high-entropy alloys (HEAs) is important both for understanding the formation of HEAs and for proper evaluation of their potential with respect to that of conventional alloys. We report the main result of such a study performed on (TiZrNbNi)1−xCux metallic glasses (MG) over a broad concentration range x ≤ 0.52 encompassing both high-entropy-MGs and Cu-based MGs. A comprehensive study of the composition, homogeneity, thermal stability, atomic structure, electronic structure, and magnetic susceptibility of 11 alloys has been performed. Thermal analysis revealed a rather weak variation of thermal parameters and glass forming ability with x. The study of the atomic structure showed a linear variation of average interatomic distances and atomic volumes close to those predicted by Vegard's law. The coordination numbers and atomic packing fractions were constant throughout the explored concentration range. The electronic density of states (DOS) showed a split-band structure with DOS close to the Fermi level dominated with d-states of Ti, Zr, and Nb. Accordingly, magnetic susceptibility decreased linearly with x and extrapolated to that of Cu. Thus, the studied alloys show ideal solution behavior similar to that of binary Cu-Ti, Zr, and Hf MGs. The results are compared with those for (TiZrNbCu)1−xNix MGs and (CrMnFeCo)1−xNix alloys and their impact on understanding the transition from high-entropy-MGs to conventional MGs with the same composition is briefly discussed.
Photoemission spectroscopy (PES) is an underrepresented part of current and past studies of compositionally complex alloys (CCA) such as high-entropy alloys (HEA) and their derivatives. PES studies are very important for understanding the electronic structure of materials, and are therefore essential in some cases for a correct description of the intrinsic properties of CCAs. Here, we present several examples showing the importance of PES. First, we show how the difference between the split-band structure and the common-band structure of the valence band (VB), observed by PES, can explain a range of properties of CCAs and alloys in general. A simple description of the band crossing in CCAs composed from the early and late transition metals showing a split band is discussed. We also demonstrate how a high-accuracy PES study can determine the variation in the density of states at the Fermi level as a function of Cu content in Ti-Zr-Nb-Ni-Cu metallic glasses. Finally, the first results of an attempt to single out the contributions of particular constituents in Cantor-type alloys to their VBs are presented. The basic principles of PES, the techniques employed in studies presented, and some issues associated with PES measurements are also described.