CARMEN CASTRO

Dr. CARMEN CASTRO


Research Focus & Metrics

Academic Career Length

9Years (2018-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
3 May 2018 in Road Materials and Pavement Design
Verified
Journal Article
Closed access
AGAntonio Carlos Rodrigues Guimarães
Antonio Carlos Rodrigues Guimarães
LMLaura Maria Goretti da Motta
Laura Maria Goretti da Motta
CCCARMEN CASTRO
CARMEN CASTRO
In this work, the permanent deformation response of fine-grained soils of different classifications was studied through repeated load triaxial tests under different stress states for a number of load cycles greater than 150.000. Soils were moulded at optimum water content compressed with an amount of energy equivalent to intermediate or normal Proctor. Seven fine-grained soils were selected with the following MCT (Miniature, Compacted, Tropical) classifications: four lateritic clayey, one lateritic sandy, one non lateritic sand and one non lateritic silt. The values of total permanent deformation are presented. The parameters of deformability Ψi were estimated. The permanent deformation calculations were simulated for three different stress levels: low, medium and high.

7 December 2020 in Transportation Geotechnics
Verified
Journal Article
Closed access
AGAntonio Carlos Rodrigues Guimarães
Antonio Carlos Rodrigues Guimarães
KCKíssyla Ávila Costa
Kíssyla Ávila Costa
Marcelo de Miranda ReisMarcelo de Miranda Reis
Marcelo de Miranda Reis
CSClaudeny Simone Alves Santana
Claudeny Simone Alves Santana
CCCARMEN CASTRO
CARMEN CASTRO

22 October 2024 in Mining
Verified
Journal Article
Open access
PDF file
AGAntonio Carlos Rodrigues Guimarães
Antonio Carlos Rodrigues Guimarães
MAMarcio Leandro Alves de Arêdes
Marcio Leandro Alves de Arêdes
CCCARMEN CASTRO
CARMEN CASTRO
LCLisley Madeira Coelho
Lisley Madeira Coelho
Sergio Neves MonteiroSergio Neves Monteiro
Sergio Neves Monteiro
Mineral extraction is an important operation for the economy of different countries and generates millions of tons of mining waste. In this context, and in association with the high demand for paving aggregates and the lack of raw materials for this purpose, the feasibility of using iron ore processing waste has emerged as a promising alternative. This study evaluates the physical and mechanical behavior of asphalt mixtures incorporating waste from the company Samarco S.A., collected in Mariana-MG, to replace the fine aggregate in asphalt concrete mixtures, with a view to applications in the bearing layer of local traffic roads. Two mixtures, M2 and M3, containing 20% and 17% waste, respectively, were formulated and analyzed, compared to a reference mixture, M1. Evaluations were carried out using the Marshall method parameters, mechanical tests of resilience modulus, and fatigue life under controlled tension, as well as mechanistic analysis. Brazilian mechanistic–empirical design software (MeDiNa—v 1.5.0) contributed to this analysis. This analysis revealed that, for a traffic level of N = 5 × 106 (average traffic) on a local road, pavements containing the M1 and M3 mixtures had the same layer thicknesses (6.9 cm), as well as the same fatigue class, equal to 1. The pavement with the M2 mixture had the thickest asphalt layer (8.2 cm) and a lower fatigue class equal to 0. But if compared in terms of the percentage of cracked area over 10 years, it still offers ideal performance conditions compared to the M1 and M3 mixes. Thus, it can be considered feasible to replace fine aggregate with iron ore waste in asphalt concrete for use on local roads in the region without altering the bearing capacity of the pavement.

31 August 2018 in Transportes
Verified
Journal Article
Open access
PDF file
FAFreddy Richard Apaza
Freddy Richard Apaza
AGAntonio Carlos Rodrigues Guimarães
Antonio Carlos Rodrigues Guimarães
MSMayssa Alves da Silva Sousa
Mayssa Alves da Silva Sousa
CCCARMEN CASTRO
CARMEN CASTRO
Este trabalho apresenta resultados dos ensaios de caracterização física e mecânica de agregados pétreos e do resíduo proveniente do beneficiamento do minério de ferro, da cidade de Mariana/MG, bem como a caracterização física e mecânica de traços de Microrrevestimento Asfáltico a Frio (MRAF), considerando a incorporação do resíduo de ferro como agregado miúdo, tendo-se como referência as normas técnicas vigentes. Esse tipo de revestimento é aplicado, geralmente, em rodovias com alto volume de tráfego, as quais, durante a manutenção, requerem a liberação imediata das vias. O uso do resíduo em MRAF é importante, pois reduz o passivo ambiental das barragens de rejeitos e viabiliza o uso de materiais alternativos, agregando ao pavimento desempenho mecânico satisfatório e promovendo redução de custos. A análise química e ambiental do resíduo mostrou que ele se classifica como não perigoso e inerte. O comportamento mecânico dos corpos de prova de MRAF contendo agregado do resíduo de ferro mostrou que os resultados obtidos são compatíveis com a literatura, bem como mostrou ter desempenho semelhante aos agregados usuais, indicando tratar-se de um material com uso promissor nesse tipo de técnica de pavimentação.

12 September 2022 in Applied Sciences
Verified
Journal Article
Open access
PDF file
CNCarlos Fabian Navarrete
Carlos Fabian Navarrete
AGAntonio Carlos Rodrigues Guimarães
Antonio Carlos Rodrigues Guimarães
MMMaria Esther Soares Marques
Maria Esther Soares Marques
CCCARMEN CASTRO
CARMEN CASTRO
TTTheofilos Toulkeridis
Theofilos Toulkeridis
The current study presents the evaluation of the mechanical behavior of an asphalt mixture using the alternative aggregate boiler coke ash, an element that originates in nickel processing. Hereby, we have focused the research on the runways for military purposes, which marks a great difference to the existing commercial runways in the Western Brazilian Amazon. This area suffers extreme heat, with temperatures oscillating up to 80 °C on the corresponding asphalts. This leads to deformations that are the main aim of the present investigation and the main consideration of fatigue damage. The main property of the alternative aggregate, whose granulometry composes the fine elements of the asphalt mix, is the pozzolanity that acts as a cement in the putty of the mix. Based on our experimental approaches, there is a significant improvement in the results of the tests standardized by DNIT, ABNT and DIRENG, allowing the technical and economic evaluation of the used mixture. Another fundamental aspect is the reduction of the volume of waste disposed of in nickel processing plants in Brazil.

30 April 2018 in Transportes
Verified
Journal Article
Open access
PDF file
RLRita de Cássia Barreto de Araújo Loures
Rita de Cássia Barreto de Araújo Loures
AGAntonio Carlos Rodrigues Guimarães
Antonio Carlos Rodrigues Guimarães
BSBen-Hur de Alburquerque e Silva
Ben-Hur de Alburquerque e Silva
CCCARMEN CASTRO
CARMEN CASTRO
As misturas asfálticas do tipo Pré-Misturado a Frio (PMF) podem ser uma alternativa técnica, econômica e ambiental às misturas asfálticas do tipo Concreto Asfáltico Usinado a Quente (CAUQ). Entretanto a baixa resistência mecânica do PMF produzido com os materiais convencionais atende somente às solicitações de carga de tráfego leve. Como uma alternativa para ampliação do uso desta técnica, tem-se a utilização de agregados alternativos, principalmente resíduos da indústria siderugica, tal como a escória de aciaria. No estado do Rio de Janeiro (RJ), no bairro de Santa Cruz na zona oeste, a prefeitura do RJ possui uma usina de produção de mistura asfáltica PMF e também está localizada a Empresa Siderúrgica CSA, que tem interesse em dar um destino para sua produção de agregado siderúrgico. Nesse estudo, para avaliação da utilização da escória de aciaria em misturas do tipo PMF foram dosadas misturas com emulsão convencional e modificada por polímero e submetidas aos ensaios para avaliação do comportamento mecânico: estabilidade Marshall, resistência à tração (RT), vida de fadiga por compressão diametral e dano por umidade induzida. A mistura de PMF foi aplicada em duas vias da zona oeste do RJ e foram avaliadas quanto à deflexão e extraídos corpos de prova para verificação da resistência pela estabilidade Marshall e RT. Concluiu-se, a partir dos resultados obtidos tanto de campo como de laboratório, que o pavimento resistiu às solicitações, cujas magnitudes o caracterizam como de tráfego médio.