Silicon Carbide (SiC) is the predominant substrate material for optoelectronic-integrated devices. However, it challenges the wafer-slicing process because of its high hardness, brittleness, and other material characteristics. Laser processing has gained prominence as the primary method, leveraging its merits of high efficiency, precision, and micro-destructiveness. In this study, a finite element method is applied to calculate the temperature field distribution resulting from the electric field of a Gaussian beam. The simulation considers laser propagation inside 4H-SiC, non-linear absorption, and spherical aberration induced by the refractive index of the material. The influence of laser pulse energy and focusing depth are considered. The results indicate that the modification depths decrease with the increasing focusing depth. With the increase of laser pulse energy, the depth of the modification layer increases continuously. Moreover, an experimental setup has been devised to furnish valuable references in validating the proposed model.
K9 glass is a classical transparent material widely used in high-power optical systems due to its high-temperature resistance. However, the precision machining of K9 glass is difficult. The laser processing method, characterized by being non-contact, having a small heat-affected zone, and having high processing precision, is commonly employed for processing intricate structures. In this study, the vector diffraction model is employed to simulate the internal electric field inside the material when focused by objective lenses with varying numerical apertures. Furthermore, the temperature field is simulated. The simulation considered the nonlinear absorption of the material, the stretching of the focal dot due to spherical aberration, and the energy loss of the laser during the focusing process. The experiment indicated that the ablated area consists of numerous small, ablated dots and that multiple ablated areas emerged under an NA of 0.6. This study can provide valuable references for the research of the interaction between lasers and glass materials.
Combined template method with sol-gel method to make the mixed solution including polystyrene microsphere emulsion, TiO2 sol and NH3·H2O aging at room temperature. Annealing at 500 centigrade for 2 hours on mesoporous TiO2 nano material doped with nitrogen. Wrapped Ag nanoparticles on the surface of mesoporous TiO2 nano material through redox reaction. The morphology and optical porosities were characterized by Scanning electron microscope (SEM), X-ray diffraction (XRD), BET tester and Surface enhanced Raman scattering (SERS). The results showed this material has excellent surface enhanced Raman effect, optical absorption effect and also has a great specific surface area.