Seasonal freezing of highway sub soils and systematic maintenance by de-icing chemicals steadily affect their thermal regime and moisture distribution. As the result, it leads to significant change of sub soils from the designed engineering characteristics including their bearing capacity. In order to better understand the process and to evaluate the correlation between temperature field and frost heave, and also to simultaneously supply with de-icing chemicals, the modified laboratory method was developed in this research. The current test method is upgraded by increasing height of soil samples up to 1 meter. More soil columns being able to be tested simultaneously in the modified test, proposed in this study, allows better control of each stage of testing. The modified freezing regime in this new test method is closer to the scenario in cold regions in terms of temperature. The obtained results of this research are going to be presented for the first time in scientific literature.
1 January 2020 in Advances in Materials Science and Engineering
The issue of concrete strength often arises in civil engineering practice, either due to quality control of new constructions or due to the assessment of existing structures. To this aim, one of the most widely spread techniques is the rebound hammer (Schmidt hammer) test, for which calibration is still related to the original Schmidt curve dating back to the early 50’s. In spite of the large amount of research work performed in the last decades, the uncertainties of the rebound test are still not clearly quantified and open to further insight. This paper presents and discusses a wide research campaign on laboratory specimens and on third‐party specimens delivered to the Laboratory for Building Materials of the University of Genoa, Italy, for standard quality controls. While it is well known that moisture content, surface finishing, and concrete maturity strongly affect the test result, the effect of the stress state has not yet been studied and is found in this research to be a further parameter affecting the test reliability. The final outcome of all the uncertainties is variability in estimated concrete strength as large as ±70%; additionally, some issues are discussed on the intrinsic uncertainty of this test. As already demonstrated by many authors, the results of this research also show that a universal calibration curve to be used for any concrete, in any condition, conceptually does not exist.
A common soil-bio-engineering practice to prevent the erosion and the movement of soil along natural hill-slopes is the hydroseeding of herbs and shrubs, whose roots can contribute to the stability of the surficial layers of soil. So far a clear picture of the soil-roots interaction is still missing. In the present paper, the results of triaxial tests carried out both on soil-specimens naturally rooted by plants that are typical of the Mediterranean scrub (i.e. spartium-junceum, ligustrum and arbutus-unedo) and on samples reconstituted using the same material as the rooted ones, are reported. A discussion arises from the comparison between the results obtained on rooted and on reconstituted specimens. Moreover, high-precision measurements of the tensile stress of individual root fibers were also made. Finally, an interpretation of the mechanical contribution of roots to the soil strength under conditions mimicking the effect of an intense storm on the hill slopes is also provided
Monitoring changes in soil saturation is important for slope stability analyses. Soil moisture capacitive sensors have recently been developed; their response time is extremely fast, they require little maintenance, and they are relatively inexpensive. The use of low-cost sensors in landslide areas can allow the monitoring of large territories, but appropriate calibration is required. Installation in the field and the setting up of the monitoring network also require attention. In the ALCOTRA AD-VITAM project, the University of Genoa is involved in the development of a system, called LAMP, for the monitoring, analysis and forecasting of slides triggered by rainfalls. Multiple installations (along vertical alignments) of WaterScout sensors are placed in the nodes of the monitoring network. They provide real-time water content profiles in the shallow layers (typically in the upper meter) of a slope. With particular reference to these measurements, the present paper describes the reliability analysis of the instruments, the operations related to the sensor calibration and the installation phases for the monitoring networks. Finally, some of the data coming from a node, belonging to one of the five monitoring networks, are reported.