An effective method is proposed for preparing energetic microspheres by fluid-focusing microchannels. This method combines the advantages of low reagent consumption, instrument miniaturization, accurate control, and efficient heat mass transfer. The effects of the two-phase liquid flow rate ratio of water to oil on droplet formation was fully studied. To verify the applicability of the method, the nitroamine explosives HMX (cyclotetramethylene tetranitramine) was employed with the fluorine rubber (F2602) as binder to prepare HMX/F2602 microsphere, which were compared with the samples prepared by traditional water-suspension method. SEM data showed that the morphology, particle size uniformity, and monodispersity of microspheres prepared by the droplet microfluidic method are better than those prepared by traditional water-suspension method. DSC data showed that the suspension method. DSC data showed that the apparent activation energy (Ea) values of HMX/F2602 increased by 25.47 kJ/mol compared with the water-suspension coated sample. Meanwhile, compared with the raw material HMX, the H50, the fluidity and bulk density of HMX/F2602 microspheres were significantly improved (HMX/F2602 microsphere and raw HMX: H50= 86.9 and 25.2 cm, repose angle = 33.1 and 51.3°, bulk density = 0.714 and 0.604 g cm−3). This study demonstrates the feasibility of an efficient, accurate strategy to prepare the explosive microspheres.
A 2D metal organic framework (MOF) coordination compound [Cd(H2O)2(AFT)2]n (1, HAFT = 4-amino-3-(5-tetrazolate)-furazan), combining the advantages of tetrazole and furazan rings, was synthesized and characterized by elemental analysis and FTIR spectroscopy. We design and synthesize 3D energetic MOFs based on 1. Single-crystal X-ray diffraction analysis revealed that 1 belongs to monoclinic, pertains to P21/c space group, a = 7.857(3) Å, b = 9.409(3) Å, c = 9.046(3) Å and β= 93.560(4)°. In 1, Cd2+ was hexacoordinated with four AFT groups and two water molecules. Noticeably, tetrazole-ring of AFT group presents typical bidentate coordination mode and furazan-ring was not take part in coordination. Differential scanning calorimetry (DSC) indicated that 1 was thermally stable with an onset decomposition temperature more than 250°C. The non-isothermal kinetics parameters were calculated by Kissinger’s method, Ozawa’s method and starink’s method respectively. The critical temperature of thermal explosion, entropy of activation (Δ S≠), enthalpy of activation (Δ H≠), and free energy of activation (Δ G≠) were also calculated as 300.23°C, –0.67 J·K–1·mol–1, 183.46 kJ·mol–1, and 183.65 kJ·mol–1, respectively. In the end, impact sensitivity was also determined by standard method.